29
4. On the screen appears "LINE SET", with the actual setting below this
text, standard: TONE and 300 MS.
Press OK, on the display appears "DIALING MODE". Press OK once
more, the actual dialing system is shown on the screen, and with the
scroll up / down keys you can swap between "TONE" and "PULSE". To
store your choice, press OK. A confirmation beep is heard and the
setting is stored.
Setting the Flash-time
The flash key "R" (10) can be loaded with three different flash-times (80/
100/300 ms). The flash-time to be used depends on the installation, on
which your unit is connected
• connected to the public telephone network with comfort functions. (the
flash-time to be set is usually 300 ms)
or
• connected to a PBX with similar functions (the flash-time to be set is
usually 100 ms).
The comfort functions: waiting call, toggling, second call, conference
call with three must be ordered and payed for with your local telephone
network dealer.
Your dealer will also be able to tell you which flash-time has to be used on
his installation.
When the unit is connected to a personal branch exchange (PBX), its
supplier, or the delivered instruction manual will be able to inform you.
1. Proceed as described in points 1 to 3 in the description about changing
the dialing system above.
2. On the screen appears "LINE SET", with the actual setting below this
text, standard: TONE and 300 MS. Press OK and scroll down once, the
screen displays "FLASH TIME" and the actual flash-time is displayed
on the bottom line. Press OK once more, on the screen appears "SET
FLASH TIME" and with the scroll down and scroll up keys, you can
swap between "80 MS", "100 MS" and "300 MS" After having pressed
the OK key once more to confirm, you hear a confirmation signal and
the value is stored.
