26
BASE SETTING
Follow the procedure below to reach the menu "BASE SETTING":
1. Press the key MENU, and then three times on the scroll down key. The
screen displays "SETTING". Confirm with OK and press the scroll down
key once more, on the screen appears "BASE SETTING".
2. Press OK once more, on the screen appears "ENTER BASE PIN".
When the base PIN is still the original one (0000), set at the factory, this
step is skipped. When you have changed the PIN, you must input it and
confirm it with OK.
Remarks:
• When you input a wrong PIN, the screen displays "WRONG PIN
ENTERED" during five seconds.
• The settings remain stored in memory, even after having removed and
replaced the batteries.
• To leave a menu point and go back to the preceding point, just press
the clear key X (12)
• To return immediately to stand by mode, from an arbitrary menu point,
hold the clear key X (12) during some time.
• When no key is pressed during 30 seconds, the handset returns
automatically to the stand by mode.
• When you replace the handset on the base station or on the charger,
it also returns to stand by mode automatically.
Ringer volume at the base
The ringer volume can be set at three different levels (1-3) and it can also
be switched off (level 0).
The default is level 3.
1. Press the key MENU, and then three times on the scroll down key. The
screen displays "SETTING". Confirm with OK and press the scroll down
key once more, on the screen appears "BASE SETTING". By pressing
once more on the OK key, you reach the menu "ACOUSTIC
SETTING".
2. Press OK, on the screen appears "RINGER VOLUME". Confirm with
OK, the chosen melody sounds with the set volume.
