659867
21
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
Art. No. 0572
FB 04-278 Rev. 0
Date: 10.05.2016
Manual
Argos²
0572
2
Safety Instructions
Foreword 3
Safety instructions 4
Cleaning & Disinfection 8
Getting to know the unit 9
Before the use 10
Area of Application 10
Fill in the spray liquid 10
Operation 11
Application 12
Operation 12
Work positioning 13
Infilling the spray liquid 15
Mounting/Changing the filter 15
Insert the bur 15
Adjusting the speed 16
Spray 16
Drying / changing tool 16
Footswitch 16
Maintance and Care 17
Changing the washer 17
Changing the water filter 17
Cleaning function 18
Cleaning the chuck 18
Maintance overview 19
Handling instructions 20
Troubleshooting 21
Technical Details 23
4
Safety Instructions
Children should be supervised not to play with the appli-
ance.
The installation of the working area has to correspond to
the relevant regulations. Set up the unit in such a way, that
the louvers are not covered and the extracted air can es-
cape well.
To avoid the risk of an electric shock, this device might
only be connected to a power supply with protective con-
ductor.
If you pull the power plug it will stop the connection to the
mains power supply. Set up the unit so that the power plug
is always accessible. The power switch should also always
be easily accessible.
Only switch on the unit if the handpiece rests secured in
the handpiece holder, or if you hold it safely in your hand.
Prevent the permeation of liquids into the control unit. The
electronic elements could be damaged.
Clean the outside of the box only with a damped cloth. Be
sure you unplug the unit before.
Only when pulling the mains cable, you can ensure that
the device will be com-pletely disconnected from mains
check the mains cable regularly for damages, and in case
of such let it change or repair from an authorized service center.
Prevent your hair from wrapping itself around moving
parts.
If applicable, wear a hair net.
When working with materials which might create dust or
moisture use a drilling unit with suction- or spray tech-
9
Getting to know the unit
1 Display
2 Knob to start the suction and for adjusting the suction level
3 Knob for adjusting the amount of spray
4 Connection for suction hose
5 Lid of the water tank
6 Water tank
7 ON / OFF button (line voltage is not disconnected, unit in
standby)
8 handpiece speed down
9 handpiece speed up
10 Switch for modus change (spray or suction)
11 Switch for turning ON/ OFF the handpiece/ spray
12 Switch for changing running direction of the bur
13 LED (shines during counterclockwise rotation)
14 Foot switch port
1 2 3 4 5 6
20
Handling Instructions
Always deposit the handpiece
with the top downwards. There-
fore you can avoid liquid from
entering the handpiece.
Never put the handpiece into
any kind of liquid, and never oil
or grease the handpiece. Clean
its surface with a damped cloth. Pay
attention, that no moisture or liquid
enters the handpiece. Never use
spray dis-infection.
Never put any wet burs or in-
struments into the handpiece.
Its moisture could damage the
interior parts of the handpiece.
Any materials used by hadewe
prevend a formation of rust. In
cases in which a rust infestation
was found within the handpiece,
thorough inspections and examina-
tions always have proved that the
rust had a foreign origin (which was
usually caused by the tools used in
these circumstances).
Even in high-grade steel in-
struments of well known manu-
facturers, formation of rust can
appear, e.g., through wrong treat-
ment with chemical cleaning and
disinfection liquids. This extraneous
rost affects internal parts of the
handpiece in form of rust bloom and
causes pitting. Therefore, when you
not working with the handpiece, al-
ways remove the bur/ tool from it.
Always make sure that you do
not let the handpiece fall down
or exposes it to any shocks.
The ballbearings and the motor
could be damaged by this.
Only work with tools, which are
flawless.
Do not work with tools which
- are bent or out of balance
- whose shaft is worn out or
- are rusty.
Working with faulty tools will
cause a stronger vibration of
the handpiece. A damage of the
ball bearings, clamping technique or
motor could be the consequence.
Working with high pressure will
not improve the outcome of
your work, since the motor will
even be slowed down. A second
disadvantage is the stronger impact
on the ball bearings and the motor,
which will shorten their life span in
the long run.
Always working with maximum
speed might have a similar
effect. Please make sure that
the speed setting you use is accord-
ing to the work you are doing and
the instruments you are working
with.
21
Troubleshooting
Handpiece vibrates, is very noisy
and/ or becomes warm in the
front part
Use of bent burs/ tools Use a dif-
ferent bur/ tool to test this. The
bur/tool itself can be tested with the
hadewe Bur Shaft Tester (Art. No.
(4990) to see if it is bent).
Maximum allowed speed of the tool
was exceeded, which caused a
stronger vibration pay attention to
the tool (i.g. bur, capper and instru-
ment) manufacturers handling de-
tails.
Bur/tool can be inserted only with
difficulty, or not at all.
Use of bent burs/ tools Use a dif-
ferent bur/ tool to test this. The
bur/tool itself can be tested with the
hadewe Bur Shaft Tester (Art. No.
4990) to see, if it is bent).
Chuck is dirty Clean the chuck
according to the instructions in the
manual.
Bur does not clamp, or does not spin
Chuck is not tightened well Tight-
en the chuck firmly according to the
instruction in the manual.
Knob of the handpiece can not be
moved easily
Chuck is dirty Clean the chuck
according to the instructions in the
manual.
Rubber ring under the knob twists
while using it. Twist it of 180°
It does not spray
Pressure cannot be set up in the tank,
because the lid is not tightened well.
There are parts of dirt in the spray sys-
tem cleaning the spray system
according to page 10.
The blue water filter (art. No. 3497) in
the tank is blocked Change the
water filter.
Unit does not work at all.
Check, if the main switch of the unit
is turned on at the side of the unit.
Footswitch is used constantly or
faulty Pull out the socket of the
foot switch to see if this is the cause
Switch off at main switch for 10s to
reset the device
After lengthy use unit does not spray
Unit is overheated. Slots of the
unit should not be covered or
blocked. Let cool down the unit for a
while.
The unit shows different sound lev-
els at different sites of use
The sound level varies according to
the surroundings of the unit. If you
set up the unit directly in front of a
wall, the sound is reflected stronger,
as if it would, while standing further
away from a wall.
The motor of the handpiece stutters
(e.g. 1 sec.) while switching it on
Very seldom this error might occur.
It would not damage the motor at all.
22
Troubleshooting
HS, EE in Display
The motor does not start, because
thechuck is still open Insert the
bur and tighten it well (pull the black
buttonbackwards).Than start the
handpiece at max. speed.
Spray stream stutters
There is air in the spray system. Af-
ter 5 min running, this effect will dis-
appear.
Acceleration of the spray stream
Note: To reduce the starting time of
the spray, turn the spray regulator
on Max.
After the spray started, adjust the
stream to the requested amount of
water.
Fluid leaks out of the unit
Please be aware of the maximum
filling level of the tank: Do not ex-
ceed the maximum level when filling
the tank.
23
Techniqual Details
0572 Argos²
Total weight: 5,6kg
Dimension: W314xH135xD223mm
Power supply: 230V, ~, 50-60Hz
P
max
: 300 W
fuse primary:
F1/F2: 500 mA delay action fuse
F3/F4 3,15 A delay action fuse
Fuse Sec. Thermo fuse
Protection class I
Accuracy of speed display: ±10%
Handpiece:
Type B applied part
Diameter: 17-22 mm
Length: 152mm
Speed : 7000-40000 rpm
When power supply: 100V - 115V
F1/F2: 1 A delay action fuse
F3/F4: 4A delay action fuse
Operating time
The device is designed for extended
usage.
Ambient conditions:
The device is intended for use in dry,
closed rooms.
Operation:
Temp.: +10 °C to +26 °C
Rel. humidity: 25% to 75%
(not condensed)
Air pressure: 700 hPa to 1060 hPa
Storage:
Temp: -5°C to +55°C
Rel. humidity: 10% to 95%
(not condensed)
Air pressure: 500 hPa to 1060 hPa
Transport (up to 4 weeks):
Temp:-5 bis°C +55°C
Rel. humidity: 10% to 95%
(not condensed)
Air pressure: 500 hPa to 1060 hPa
Declaration of conformity
We declare under our own responsibil-
ity, that the following footcare control
units 0572 are consistent with the fol-
lowing guidelines:
2014/30/EU EMC guide line
2014/35/EU low voltage guide line
hadewe GmbH Grambartstraße 10
30165 Hannover - Germany
24
Techniqual Details
Symbol
Caution!
Important Note!
Follow instructions for use
ON/ OFF button (standby)
(no disconnection from main
power supply)
Handpiece speed up
Handpiece speed down
Change direction
Change suction/spray mode
Suction regulation
spray regulation
Turn off handpiece & Spray /
Turn on airflow
Temperature limit (indicates the
lower and upper temperature limit)
Air pressure: permissible
range
Air humidity: permissible
range
Keep dry
Alternating current
Direct current
Safety fuse
Type B applied part
Socket foot switch
Date of manufacture
Disposal
The device and filter may
contain infectious material
such as residual sanding
dust or skin particles. Therefore
please bear in mind the following
disposal instructions.
Disposing of the device
Old devices bought in Germany that
correspond to the electronic device
law should be sent directly to the
manufacturer (hadewe). We will
dispose of the device free of
charge. The devices should not be
taken to public disposal plants
(WEEE Reg.Nr DE20392713, b2b
device). For disposal of this unit out
of Germany, please contact the site
where you bought this hadewe
product.
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hadewe Argos2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hadewe Argos2 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,64 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Hadewe Argos2

Hadewe Argos2 Gebruiksaanwijzing - Deutsch - 28 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info