812036
4
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
4
regard to fuel-engineering efficiency and
flue-gas emissions are observed.
The pellet-stove may be connected to a
chimney supporting multiple connections,
if the chimney dimensions according to
DIN 4705 Part 2 permit this.Please note
that the minimum feed pressure must
be 6 Pascal and maximum feed
pressure should be maximum 20
Pascal !!
The furnace door may only be opened for
cleaning and maintenance during the
operating state „Off“. Otherwise – even
when the stove is not operated - this is to
be kept closed, in order to avoid an
impairment of other fireplaces and thereby
associated dangers.
A sufficient supply of fresh air to the
installation room must be ensured. The
pellet stove however offers you the
possibility to be connected directly with
outside air via a suitable air duct. With
that, an operation independent of room air
is possible (see chapter 3 „Installation of
the Pellet Stove and Connection to the
Chimney“).
Attention! The pellet stove may not be
set into operation during the joint
operation of domestic aeration- and
ventilation systems.
The chimney (chimney or flue resp.) must
be designed from stainless steel or
ceramic (glazed inside) and be suitable for
low waste gas temperatures, so that this
can not soot up.
The pellet stove may first be connected to
the power network after proper
professional connection to the chimney.
Attention! The mains cable plug must
remain freely accessible after the
installation.
The pellet stove may only be operated
with standardized wood pellets (6 mm
diameter) (see chapter 6.1 „Fuel“).
The protective grating located in the pellet
container must not be removed.
The placing of non-heat-resistant
materials and objects on the stove or
within the prescribed minimum distances
is forbidden. Please take note in particular
thereby, that during the operating state
„Standby“, after cooling down to the
required room temperature, the stove can
begin its heating operation unexpectedly
and unobserved.
Never use liquid fuels to set the pellet
stove into operation or to refresh the
existing embers.
Through the burning of combustible
material, thermal energy is released which
leads to the surfaces of the heating device
heating up greatly (e.g. doors, door- and
operating handles, inspection window
panes, side walls, front wall, flue pipes).
Contact with these parts without suitable
heat-protection gloves or a tool is to be
avoided!
The device starts automatically in
"Standby-Mode". Due to the development
of heat on the panel, it is to be ensured,
that there are no unsupervised persons in
the place of installation who are not
familiarized with the pellet stove.
Make your children and guests aware of
these dangers!
Possibly existing cleaning personnel are
to be especially informed, instructed
respectively with regard to the possible
unexpected heating up of the stove.
The placing of non-heat-resistant objects
on the heating device or close to it (even
when cold, since the stove can start
automatically) is forbidden!
Do not place items of laundry on the stove
to dry!
Stands for drying clothes or the like must
be set up at an adequate distance from
the heating device – danger of fire!
When operating your heating device, the
processing of lightly combustible and
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Haas-Sohn COMPACT-PELLET 310 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Haas-Sohn COMPACT-PELLET 310 in de taal/talen: Engels als bijlage per email.

De handleiding is 3.71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Haas-Sohn COMPACT-PELLET 310

Haas-Sohn COMPACT-PELLET 310 Gebruiksaanwijzing - Deutsch - 43 pagina's

Haas-Sohn COMPACT-PELLET 310 Gebruiksaanwijzing - Français - 40 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info