584662
163
Verklein
Vergroot
Pagina terug
1/268
Pagina verder
listening for static or other noise. If you hear noise, turn off your DSL modem and completely
remove power for at least 15 minutes. Turn the DSL modem back on and listen to the dial tone
again.
NOTE: You might notice static on the phone line again in the future. If the printer stops sending
and receiving faxes, repeat this process.
If the phone line is still noisy, contact your telephone company. For information on turning your
DSL modem off, contact your DSL provider for support.
If you are using a phone splitter, this can cause faxing problems. (A splitter is a two-cord
connector that plugs into a telephone wall jack.) Try removing the splitter and connecting the
printer directly to the telephone wall jack.
The printer cannot receive faxes, but can send faxes
If you are not using a distinctive ring service, check to make sure that the Distinctive Ring
feature on the printer is set to All Rings. For more information, see
Change the answer ring
pattern for distinctive ring on page 78.
If Auto Answer is set to Off, you need to receive faxes manually; otherwise, the printer cannot
receive the fax. For information on receiving faxes manually, see
Receive a fax manually
on page 67.
If you have a voice mail service at the same phone number you use for fax calls, you must
receive faxes manually, not automatically. This means that you must be available to respond in
person to incoming fax calls. Learn more about setting up the printer when you have a voice mail
service,
click here to go online for more information. For information on receiving faxes
manually, see
Receive a fax manually on page 67.
If you have a computer dial-up modem on the same phone line with the printer, check to make
sure that the software that came with your modem is not set to receive faxes automatically.
Modems that are set up to receive faxes automatically take over the phone line to receive all
incoming faxes, which prevents the printer from receiving fax calls.
If you have an answering machine on the same phone line with the printer, you might have one
of the following problems:
Your answering machine might not be set up correctly with the printer.
Your outgoing message might be too long or too loud to allow the printer to detect fax
tones, and the sending fax machine might disconnect.
Your answering machine might not have enough quiet time after your outgoing message to
allow the printer to detect fax tones. This problem is most common with digital answering
machines.
The following actions might help solve these problems:
When you have an answering machine on the same phone line you use for fax calls, try
connecting the answering machine directly to the printer,
click here to go online for more
information.
Make sure the printer is set to receive faxes automatically. For information on setting up the
printer to receive faxes automatically, see
Receive a fax on page 67.
Make sure the Rings to Answer setting is set to a greater number of rings than the
answering machine. For more information, see
Set the number of rings before answering
on page 78.
ENWW Solve fax problems 147
163

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw HP Officejet Pro 8630 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van HP Officejet Pro 8630 in de taal/talen: Engels als bijlage per email.

De handleiding is 8,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van HP Officejet Pro 8630

HP Officejet Pro 8630 Gebruiksaanwijzing - Nederlands - 276 pagina's

HP Officejet Pro 8630 Gebruiksaanwijzing - Deutsch - 286 pagina's

HP Officejet Pro 8630 Snelstart handleiding - Alle talen - 120 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info