20200
135
Verklein
Vergroot
Pagina terug
1/304
Pagina verder
If the job will not print, and a message
appears on the printer control panel display,
see
Interpreting control-panel messages.
Using the computer, check to see if the
printer has been paused. Press S
TOP
to
continue.
If the printer is on a network, check that you
are printing to the correct printer. To verify
that it is not a network problem, connect the
computer directly to the printer with a
parallel or USB cable, change the port to
LPT1, and try to print.
Check the interface cable connections.
Disconnect and reconnect the cable at the
computer and the printer.
Test the cable by trying it on another
computer.
If you are using a parallel connection, make
sure that the cable is IEEE-1284 compliant.
If the printer is on a network, print a
configuration page. (See
Configuration
page.) If an HP Jetdirect print server is
installed, a Jetdirect page also prints. Check
the Jetdirect configuration page to verify that
the network protocol status and settings are
correct for the printer.
To verify that it is not a computer problem,
print from another computer (if possible).
Make sure that the print job is being sent to
the correct port (LPT1 or network printer
port, for example).
Check that you are using the proper printer
driver. (See
Using the printer driver.)
Reinstall the printer driver. (See the getting
started [start] guide.)
Check that the computer port is configured
and working properly. (Try connecting
another printer to that port and printing.)
If printing with the PS driver, on the Printing
submenu (on the Configure Device menu) at
the printer control panel, set PRINT PS
ERRORS=ON, and then print the job again.
If an error page prints, see the instructions
in the next column.
On the System Setup submenu (on the
Configure Device menu) at the printer
control panel, make sure that
PERSONALITY=AUTO.
You might be missing a printer message
that could help you solve the problem. On
the System Setup submenu (on the
Configure Device menu) at the printer
control panel, temporarily turn the Clearable
Warnings and Auto Continue settings off.
Then, print the job again.
The printer might have received a
nonstandard PS code. On the System Setup
submenu (on the Configure Device menu) at
the printer control panel, set
PERSONALITY=PS for this print job only.
After the job has printed, return the setting
to AUTO.
Make sure that the print job is a PS job, and
that you are using the PS driver.
The printer might have received PS code
although it is set to PCL. On the System
Setup submenu (on the Configure Device
menu), set PERSONALITY=AUTO.
ENWW Troubleshooting flowchart 123
135

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw HP LASERJET4350 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van HP LASERJET4350 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info