669388
48
Verklein
Vergroot
Pagina terug
1/70
Pagina verder
k. To clear the warning, press Enter.
l. To exit Advance, press the Esc key.
3. To disable SPD Write:
a. Select Chipset > PCH-IO Configuration, and then press the Enter key.
b. Select SPD Write Disable and press Enter.
c. To disable SPD write, select Enable and press Enter.
d. To exit Chipset, press the Esc key.
e. Select Save & Exit > Save Changes and Exit, and press Enter.
f. To save changes, select Yes. The server automatically reboots.
Embedded SATA RAID feature
The server ships with an embedded Intel Rapid Storage Technology SATA RAID Controller. The SATA
driver required for RAID configuration is embedded in the OS and will be installed along with the
installation of operating system or can be obtained from the Hewlett Packard Enterprise website.
For more information about the controller and its features, see Support for Intel Rapid Storage
Technology on the Intel website.
To configure arrays, see Setting Up and Configuring Intel AMT and RAID volumes on ProLiant ML10
Gen9 Server on the Hewlett Packard Enterprise website.
Intel Active Management Technology
This ProLiant server uses Intel AMT processor technology to simplify management and reduce IT-related
expenditures. Intel AMT processor technology allows for improved management of PC systems and
better security. AMT is a platform-resident solution that includes both hardware and firmware, and relies
on the Management Engine integrated into supported Intel chipsets. AMT provides out-of-band remote
access to a system regardless of the power state or operating system condition as long as the system is
connected to a power source and a network.
The server only supports Intel AMT when the supported Intel Xeon processor is installed in the system.
The server only supports the Intel Standard Manageability when the supported Intel Pentium or Core i3
processor is installed. The instructions for downloading the Intel AMT and Standard Manageability
software and firmware are available on the Hewlett Packard Enterprise website.
By default, AMT is inactive, and must be set up and configured in the MEBX before it can be used.
For more information, see Setting Up and Configuring Intel AMT and RAID volumes on ProLiant ML10
Gen9 Server on the Hewlett Packard Enterprise website. See the Intel website for other white papers
and technical information regarding AMT and Standard Manageability.
USB support
Hewlett Packard Enterprise servers support both USB 2.0 ports and USB 3.0 ports. Both types of ports
support installing all types of USB devices (USB 1.0, USB 2.0, and USB 3.0), but may run at lower
speeds in specific situations:
USB 3.0 capable devices operate at USB 2.0 speeds when installed in a USB 2.0 port.
When the server is configured for UEFI Boot Mode, it provides legacy USB support in the pre-boot
environment prior to the operating system loading for USB 1.0, USB 2.0 , and USB 3.0 speeds.
When the server is configured for Legacy BIOS Boot Mode, it provides legacy USB support in the pre-
boot environment prior to the operating system loading for USB 1.0 and USB 2.0 speeds. While USB
3.0 ports can be used with all devices in Legacy BIOS Boot Mode, they are not available at USB 3.0
speeds in the pre-boot environment. Standard USB support (USB support from within the operating
system) is provided by the OS through the appropriate USB device drivers. Support for USB 3.0 varies
by operating system.
48 Embedded SATA RAID feature
48

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw HP Gen9 ML10 ProLiant H bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van HP Gen9 ML10 ProLiant H in de taal/talen: Engels als bijlage per email.

De handleiding is 4,98 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info