488783
23
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
23
4 Getting started
Setting the
digital recording
level
One of the advantages of digital-
to-digital recording is that you
don't have to set recording
levels—and risk distortion by
overloading the disc. With pre-
recorded material, the digital level
has usually been optimized and
you shouldn't need to change it. If
you're making a digital copy of a
CD, DAT or MD that was not
optimally produced and that was
consistently under-recorded, you
can boost the overall level by up
to +20dB. Remember though,
that any peaks in the original
recording run the risk of
distorting the copy.
In many other digital recording
applications, you may also have
cause to boost the recording
volume since the volume of some
digital sources can be relatively
low, but again, if there are any
peaks in the source material, you
run the risk of momentary
distortion.
It's also possible to reduce the
digital recording volume, but in
most cases, this is not desirable.
However, if you're putting
together a mix CD (various tracks
compiled from different sources),
and there is a track which stands
out as generally louder than the
others, then you might want to
reduce the level of that track.
Note that this feature will not
remove distortion already on the
source material.
Once changed, the new digital
recording level remains until you
change it again, or reset it. Each
digital input has its own level
which can be set independently.
Note: If you are recording DTS
encoded audio CDs or HDCD
format CDs, the digital recording
level must be set to 0.0dB for
recording.
MONITOR
INPUT
SELECTOR
AUTO
MANUAL
TITLE/MODE
TRACK NO.
WRITE
DISPLAY
FINALIZEERASE
SCROLL
CD TEXT
1
DIGITAL
REC LEVEL
ANALOG
REC LEVEL
MENU/
DELETE
TEXT
SYNCHRO
PROFESSIONAL
4,5,6
3
4,6
ENTER
CURSOR
MENU/
DELETE
TEXTMARK
SET
CLEAR
TITLE
/MODE
7
1
¡
8
3
4
¢
ABC DEF
GHI MNOJKL
PQRS TUV WXYZ
REC SYNCHRO
REPEAT RANDOM NAME CLIP
I
NPUT
SELECTER
FADER
SKIP PLAY
COMPACT DISC RECORDER
REMOTE CONTROL UNIT
SKIP ID
PROGRAM CHECK CLEAR
AUTO /
MANUAL
123
4
56
78
9
10/0 >10
SCROLL
DISPLAY
•
5
3
1
1 Make sure one of the
digital inputs is selected.
Pressing INPUT SELECTOR
repeatedly switches the active
input:
Analog - Optical - Coaxial
The recorder's display indicates
the current input.
2 Make sure the recorder is
stopped, then press
RECORD
(
REC on the
remote control).
The recorder goes into record-
pause. (You can also press
MONITOR.)
3 Press MENU/DELETE.
4 Turn the jog dial until D.
VOL appears in the display,
then press to ENTER.
If there is nothing connected to
the selected digital input, the
message DIN UNLOCK appears in
the display.
The display shows current digital
recording level.
5 Turn the jog dial or press
44
44
4 or
¢¢
¢¢
¢ on the remote
control to adjust the re-
cording level up or down.
The maximum adjustment
possible is between
MIN(silence) and +20dB.
Pressing the jog dial (
ENTER)
and holding for 3 seconds
resets to OdB.
6 Press the jog dial (ENTER)
to confirm the digital
recording level.
2
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw HHB CDR-830 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van HHB CDR-830 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info