488783
18
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
4 Getting Started
18
Recording modes
The recorder is equipped with a set of analog
input terminals, as well as both optical and
coaxial digital inputs. This means that the CDR-
830 is compatible with almost all audio
sources—analog or digital. It even has a built in
sampling rate converter making it ideal for
recording from 48kHz DAT or other digital
source, which might be at a sampling rate
different to that of CD. Since CDs are always
recorded at a sampling rate of 44.1kHz, sample
rate conversion is completely automatic—if the
recorder senses a digital signal at either 32 or
48kHz, it will convert it to 44.1kHz. Note that
this recorder can't convert 96kHz digital sources
(such as some DAT tapes and DVD discs).
Miscellaneous information
The minimum recordable time is four
seconds.
Usually, track numbers are recorded onto the
disc automatically when recording. If you
decide to switch off this feature (for example,
when you’re recording from a digital
broadcast), be sure to input track markers as
recording is taking place—you can’t add them
after recording is complete. See page 33 for
more on manual and automatic track number-
ing.
The maximum number of tracks on a disc is
99.
Digital recording from DAT
If you’re recording a DAT tape that was recorded
using the DAT machine's auto ID function, the
IDs on the tape may be slightly after the
beginning of the actual recording. This can cause
problems for the CD recorder:
The start of the track may not be recorded.
The track number will be recorded on the disc
after the start of the track.
The beginning of the next track on the DAT is
unintentionally recorded.
To avoid these problems, we recommend
recording start IDs on the DAT manually, if
possible. If this is not possible, or if there are no
start IDs on the DAT, we recommend using
manual track numbering while recording to CD
to ensure that new tracks are starting in the
right places. Refer to the instructions for your
DAT recorder for more information.
You might also encounter problems if you try to
synchro-record all tracks from a DAT that is set
to program play. If you want to record a DAT in
program play mode, use the 1-track synchro
recording mode—see page 19 for how to do
this.
Digital signal interruptions
Sources of signal interruption include power or
source component failure, accidental
disconnection of the interconnect cord, and
interruption of digital broadcasts. In all these
cases, if the signal resumes within about five
seconds, the result will just be a blank section on
the disc. If the interruption is longer than five
seconds, the recorder displays the error
message: DIN UNLOCK and recording is paused.
Power interruptions
Never switch off the CDR-830 while it's
recording, or while the display shows PMA REC
(Program Memory Area Recording). If there's a
power failure, or you accidently disconnect the
power from the wall outlet while recording is in
process, you may lose at least part of the
recording.
After recording, always remove the disc from
the recorder before switching the power off.
Failure to do this could result in you losing some
of the recorded material on the disc.
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw HHB CDR-830 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van HHB CDR-830 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info