488783
10
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
10
2 Connecting up
When connecting optical leads, take care not to
bend the cable around sharp corners as this can
damage the cable. Likewise, when storing optical
cable, coil loosely (as shown on page 7).
If you’re using one of the coaxial-type digital
connectors you’ll need a lead with an RCA/
phono plug at each end. Please only use digital
audio cables, not normal audio interconnects.
Using the digital inputs
To make direct digital recordings on the CDR–
830 you’ll need to connect the digital output of a
source (like a CD, MD, or DAT player) to one of
the digital inputs on this unit. To make
recordings from analog sources (like an analog
tape deck) connect the outputs of your analog
source to the line inputs of the CDR–830—see
the following page for more detail.
Using the digital outputs
If you have another digital recorder, such as a
MD or DAT recorder, you might want to use the
CDR–830 as a digital source. In this case,
connect one of the digital outputs of the CDR–
830 to a similar digital input on your other digital
recorder.
Digital playback component
(Digital console CD, MD, DAT player, etc.)
Digital recording component
(CD-R, MD, DAT recorder,
etc.)
Please ensure that if you are using the coaxial
digital connections that 75 ohm video type cable
is used.
Connecting up for digital
playback & recording
The diagrams on these pages show possible
connections with various other components in
your system. Before you start connecting your
system, make sure that all the components are
switched off and disconnected from the wall
outlet.
About optical and coaxial jacks
The CDR–830 has both optical and coaxial jacks
for both digital input and output. There’s no need
to connect both, but since some equipment has
only one type of connector—and you can only
connect like with like—having both types on this
unit can be an advantage.
To use the optical jack, you’ll need an optical cable.
These are readily available at audio dealers. When
buying, check that the cable is no longer than 3m.
Pull out the dust cap and store it
in a safe place for future use.
Check that both optical plug and
socket are free from dust—if
necessary, clean with a soft, dry
cloth. The optical lead will only go
in one way, so match up the jack
and the plug before inserting fully.
CDR–830
Choose either the
coaxial or the optical
connector.
or
Before making or changing the connections,
switch off the power and disconnect the power
cord from the AC outlet.
or
LINE
IN
DIGITAL IN
OPTICAL COAXIAL OPTICAL COAXIAL
DIGITAL OUT
AC IN
REC
OUT
PLAY
L
R
DIGITAL OUT
OPTICAL COAXIAL
DIGITAL IN
OPTICAL COAXIAL
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw HHB CDR-830 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van HHB CDR-830 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info