702019
8
Verklein
Vergroot
Pagina terug
1/55
Pagina verder
• Setting the temperature :
Before you start cooking, choose the temperature. If you do not have to cook the ingredients,
go directly to the next point.
Press the TEMP. When the pictogram TEMP lights, press + to increase the temperature or
- to reduce. If you keep pressing the + or - button, the temperature will be increased or
decreased rapidly.
Press the button once to add or remove 10 °C.
The temperature of this appliance can be adjusted from 30 °C to 120 °C.
• Setting the speed of rotation of the blades :
Press the SPEED button. When the pictogram SPEED lights, press + to increase speed or
- to reduce.
Note: For mixtures, adjust the speed from 1 to 5. When you make the sauce or juice, adjust
the speed between 5 and 9.
• Start the appliance :
Press the START / STOP button. The appliance will start working. The time will begin to
count down to 0:00. Once the work is finished, the appliance will emit a beep. Press again
the START / STOP button to stop the appliance.
Important :
• When you do not choose to temperature or time but you just adjust the speed, the
appliance can be operated. Its maximum operating time is 20 minutes. After 20 minutes, the
appliance stops automatically and emits a beep to alert you.
• When using the cooking function, it is also necessary to set the time and speed. If you only
adjust the temperature but not the time or speed, the appliance will not work. When cooking
is finished, the time is 00:00. The appliance will stop heating but the blades will continue to
run for 10 minutes and stop with a beep so you do not burn the food by leaving it in the jug.
• When you choose the cooking mode, the maximum speed is 5.
• When the time reaches 0:00, the appliance will emit a beep. After 5 minutes, the appliance
will beep again if you ignore.
Dough function (dough) :
Use this button to yeast or bread dough (the LCD will appear as in Figure 19).
Set first time and then press the button DOUGH. Then press the START / STOP button. This
function will trigger a preset program which operates in the following manner : Speed 3 for 3
seconds, stop for 4 seconds and then again speed 3 for 3 seconds, stop for 4 seconds etc …
For example, put 500gr of flour in the jug (the jug must be dry and not contain water) and
correctly place the jug on the appliance. Set the time to 3 minutes and
press the button DOUGH then the START / STOP button. The preset
program will start. At 1 minute of the end, pour 300 ml of water in the
jug. When the time reaches 0:00 you can remove dough.
Note: When using the paste function (Dough), the jug must be dry to
prevent sticking risks during mixing. Flour (cake) should not exceeded
500gr, water must not exceed 300ml and time should not exceed 3
minutes. The proportions of flour and water are 5/3. The result will be
better if you add a few drops of oil into the flour. When using a high gluten flour (for bread),
the amount of flour should not exceed 300gr.
Caution: At the end of the preparation of the dough, be careful when removing the blades to
avoid cuts. This appliance can move during the preparation of the dough. So put the
Fig 19
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw H.Koenig HKM1028 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van H.Koenig HKM1028 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 6,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info