786856
10
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
contains the order and status. For the Getter, the answer contains the order and the data if everything goes well.
Otherwise, the answer contains the order and status.
Setter Getter
request: control + data
answer: control + data
OR
request: control + status
request: control
request: control + status
SYNTAX
The exchanges between the computer and the SUM are done in ASCII characters.
Each request and response ends with <CR><LF>(or 0x0D0A or «\r\n»).
The command name contains no spaces.
The name of the command is followed by an equal «=».
In a Setter request and a Getter response, the data follows the equal sign «=». They are separated by a semicolon
«;». For decimal data, the decimal separator is «.». The data are shown without units.
For a Getter request, a question mark «?» follows the equal sign «=».
The status has 2 values: «OK» or «KO».
Example of exchanges between the computer and the SUM :
«
Process_state=
run
<CR><LF>
» the computer asks to start the load.
«
Process_state=
OK
<CR><LF>
» the SUM returns the correct acknowledgement of the order.
«
Process_state=
?
<CR><LF>
» asks for the status of the current process.
«
Process_state=
idle
<CR><LF>
» returns the value requested here IDLE (stopping process).
«
Process_sta=
?
<CR><LF>
» request for Getter badly formed, the command name does not exist.
«
Process_sta=
KO
<CR><LF>
» returns an error response.
«
Date=
2020
;
13
;
31
;
08
;
53
;
10
<CR><LF>
» updates the product date with a wrong value (MM=13).
«
Date=
KO
<CR><LF>
» returns an error status.
LIST OF GETTER FOR GYSFLASH CNT
Typical Getter
request Gysash CNT answer Arguments
Names Possible values Description
Version=? Version=
Produit1
;
HW_version1
;
SW_version1
;
Produit2
;
HW_version2
;
SW_version2
Produit1
Produit2 e.g.:
GYSFLASH 121.12 CNT
Smart USB module
Name(s) of the product(s) pre-
sent on the SMC network
HW_version1
HW_version2 e.g.:
HW 1-2
HW E0046IND1-0
Associated hardware version
SW_version1
SW_version2 e.g.: SW V06.01 Associated software version
Serial=? Serial=
Produit1
;
SN1
;
Produit2
;
SN2
Produit1
Produit2 e.g.:
GYSFLASH 121.12 CNT
Smart USB module
Name(s) of the product(s) pre-
sent on the SMC network
SN1
SN2 e.g.:
20.02.026971.000001 Associated serial number
Product_info=? Product_info=
U
;
I U 0 to 48 in V Charger voltage
I0 to 120 in A Current charger
P
roduct_name=? Product_name=
product_name product_name e.g.: GYSFLASH 121.12
CNT Charger's name
MMI_state=? MMI_state=
MMI_state MMI_state lock Locked
unlock Unlocked LOCK : Locking the charger
interface buttons. In this con-
guration, only the SUM can ma-
nage the charger.
Mode=? Mode=
mode mode init
charge
BSU
Voltage_test
CCA_test
Alternator_test
settings
Type of mode in use
10
SMART USB MODULE EN
Translation of the original instructions
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gys Smart USB Module bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gys Smart USB Module in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 3.23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info