665727
8
Verklein
Vergroot
Pagina terug
1/33
Pagina verder
8
6. Set the gas flow on the gas bottle regulator and then open the valve of the torch
7. To strike an arc :
a- Touch workpiece with the
electrode.
b-
Raise the electrode from
2 to 5 mm
from the
workpiece.
8. At end of the weld :
Up 2 times the arc (up-down-up-down) to start the automatic downslope (see paragraph below). This
movement must be performed in less than 4 sec, at a height of 5 to 10 mm. Then close the valve to
stop the gas after cooling the electrode.
Automatic downslope with adjustable time
Function activation :
This function enables to have a clean weld and to avoid cracks and craters at the end of the weld by
gradually decreasing the welding current until the arc stops. By default this function is not activated. To
active it proceed as follow:
1- Press the selector key
2. Adjust the downslope time from 1 to 10 sec (display) using key .
3. Save the required value by pressing the selector key .
Recommended combinations / Electrode grinding
Current (A)
Ø Electrode (mm)
= Ø Rod (filler metal)
Ø Nozzle
(mm)
Flow rate
(Argon L/mn)
0.5-5 10-130 1.6 9.8 6-7
4-8
130-200
2.4
11
7-8
To optimize the quality of the weld, use an electrode grinded as below :
d
l
THERMAL PROTECTION & DUTY CYCLE
Thermal protection: thermal protection light turns on and the cooling time is about 1 to 5 min according
to external temperature.
Leave the machine connected to the power supply after welding in order to let it cool down.
The device described has an output characteristic of 'constant current' type. The duty cycle is indicated in
the table below according to EN60974-1 Norm.
PROGYS 200 A PFC
X% @
I max
X% @
I max
20%
200A
27%
200A
60%
120A
60%
145A
100%
90A
100%
117A
MAINTENANCE
Refer all servicing to qualified person.
Disconnect the unit from the mains and wait until the fan stopped before working on the unit. Inside the
device, voltage and current are dangerous.
L = 2.5 x d.
L
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gys PROGYS 200A PFC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gys PROGYS 200A PFC in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 0,83 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info