625735
6
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
6/28
This manual contains important safety and operating instructions. Read this manual carefully before
using the charger for the first time and keep it in a safe place for future reference.
PRODUCT FEATURES
GYSFLASH is designed for charging a variety of SLA (Sealed Lead Acid) batteries, widely used in cars
and other vehicles. GYSFLASH 7A is suitable for WET/Flooded (Liquid Electrolyte), GEL (Gelatine type
Electrolyte, absorbed into the plates), AGM (Absorbed Glass Mat) and CA (Calcium) batteries.
GYSFLASH 7A charges 12V batteries (6 cells of 2V) from 1.2 Ah to 130 Ah, or provides a maintenance
charge for 12V batteries from 1.2 to 230 Ah.
GYSFLASH 4A charges 12V batteries (6 cells of 2V) from 1.2 Ah to 70 Ah, or provides a maintenance
charge for 12V batteries from 1.2 to 130 Ah.
SAFETY INFORMATION
Do not attempt to charge non rechargeable batteries.
If the power cable is damaged, stop using the machine. Any repair must be carried out by
GYS or an authorized repair agent in order to avoid danger.
Respect the fuse rating indicated on the charger.
Do not cover the charger while charging.
Always read the instructions carefully before charging. Unplug the charger from the mains
before connecting or disconnecting the clamps from the terminals of the battery.
Attention: Explosive gas, avoid sparks and flames. Ensure that the unit is in a sufficiently
ventilated area during charge.
Separate collection required. Do not dispose of in domestic refuse.
This device is not intended for use by persons (including children) with reduced physical or
mental capabilities, or lack of experience and knowledge, unless they have been given by a
person responsible for their safety, supervision or instructions concerning the use of the
device. Children should not play with the appliance. Cleaning and maintenance should not
be performed by unsupervised children.
During use the unit should be placed so that the mains socket is accessible.
CONNECTING
Charging of a permanently installed battery in a vehicle
a- Plug the charger into the mains
b- Check polarity of battery terminals. A positive (+) battery terminal usually has a larger diameter
than a negative one.
c- Identify the terminal of battery which is connected to the chassis (earth) - this is normally the
negative terminal.
d1- Charging a negative earthed battery:
Connect the red clamp to the positive (+) terminal of the battery and the black clamp to the
negative (-) terminal of the battery or to the vehicle chassis.
d2- Charging of positive earthed battery:
- Connect the black clamp to the negative (-) terminal of the battery and the red clamp to the
positive (+) terminal of the battery or to the vehicle chassis.
Charging a battery not connected to a vehicle
a- Plug the charger into the mains
b- Connect the red clamp to the positive (+) terminal of the battery and the black clamp to the
negative (-) terminal.
For permanent connection to the vehicle battery use the cable with eyelet terminals = accessory
n°15)
Warning: Do not connect the cables to the battery terminals during installation.
a- Connect the red cable to the positive (+) battery terminal
b- Connect the black cable to the negative (-) battery terminal
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gys GYSFLASH 7A bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gys GYSFLASH 7A in de taal/talen: Nederlands, Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 0,93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info