624760
28
Verklein
Vergroot
Pagina terug
1/88
Pagina verder
22
follow the safety instructions and manuals may result
in electric shock, re and/or serious injuries.
Save all warnings and instructions for future ref-
erence.
The term „electric tools“ used in the safety instruc
-
tions refers to electricity-powered tools (including
electric cable) and battery-powered tools (without
electric cable).
1) Safety in the place of work
a) Keep the place of your work clean and well lit.
Mess or an unlit workplace may lead to injuries.
To prevent tripping, remove any obstacles on
the site.
When being operated, the machine must stand on
a horizontal and at surface and the oor around
the machine must be at, well-maintained and
with no waste, such as sawdust and cuttings.
Make sure there is nobody present in the dan-
gerous area. The minimum distance is 3 m.
b) Do not work with electric tools in conditions with
ammable liquids, gases or dust. Electric tools
produce sparks able to ignite dust or fumes.
c) Keep children and other persons outside the place
where the electric tools are used. When not con
-
centrated, you may lose control over the machine.
2) Electrical safety
a) The plug of an electric tool must strictly corre
-
spond to the socket. The plug must not be altered
in any case. Do not use any adapters together with
earthed electric tools. Unaltered plugs and appro-
priate sockets reduce the risk of electric shock.
b) Prevent contact of your body with earthed sur
-
faces, such as tubes, heating, cookers and fridges.
There is an increased risk of electric shock if your
body is earthed.
c) Do not expose electric tools to rain and moisture.
Water entered in electric tools increases the risk of
electric shock.
d) Do not use the cable in conict with its designa
-
tion, to carry or hang electric tools or to pull the
plug out of socket. Protect the cable against high
temperatures, oil, sharp edges or moving parts
of the machine. Damaged or entangled cables
increase the risk of electric shock.
e) When working with electric tools outdoors, use
extension cables suitable for outdoor use. Using an
extension cable suitable for outdoor use reduces
the risk of electric shock.
f) If operating electric tools in wet conditions cannot
be avoided, use a safety switch against stray
current. Using a safety switch against stray current
reduces the risk of electric shock.
3) Safety of persons
a) Be careful, pay attention to what you are doing and
use common sense when working with electric
tools. Do not use electric tools when you are tired
or under the inuence of drugs, alcohol or phar
-
maceuticals. A moment if inattention when using
electric tools may lead to serious injuries.
b) Use personal protective equipment and protective
glasses at all times. Using personal protective
equipment, such as the respirator, non-slip shoes,
protective helmet or ear protectors, depending on
the type and use of electric tools, reduces the risk
of injuries.
c) Prevent the machine from unintentional starting.
Before plugging and/or connecting the machine
to battery, handling or carrying, make sure the
electric tools are switched o. Having a nger on
the switch when carrying the electric tool or when
the machine is on when plugging it may lead to
injuries.
d) Before starting any electric tool, remove any
adjusting wrenches and screwdrivers. A tool or a
wrench present in the rotating part of the machine
may lead to injuries.
e) Avoid any abnormal body posture. Provide good
stability and keep balance at all times. By this,
electric tools are better controlled in unexpected
situations.
f) Wear appropriate clothing. Do not wear loose
clothing and jewels. Keep hair, clothing and gloves
out of rotating parts. Loose clothing, jewels and
long hair may get caught by moving parts.
g) If dust exhausters and catchers are to be installed,
make sure they are tted and used properly. Using
a dust exhauster may reduce the exposure to dust.
4) Use and treatment of electric tools
a) Do not overload the machine. Use appropriate
electric tools for your work. Working with appro
-
priate electric tools is better and safer when within
the specied power range.
b) Do not use electric tools with a defective switch.
An electric tool that cannot be switched on or o is
dangerous and must be repaired.
c) Unplug the machine and/or remove the battery
before any machine adjustment, replacement of
accessory equipment and storing the machine.
This safety measure prevents unintentional star
-
ting of the electric tool.
d) Keep any electric tool that is not being used out of
reach of children. The machine must not be used
by persons not familiarised with its use and not
having read these Instructions. Electric tools are
dangerous if used by inexperienced persons.
e) Treat electric tools carefully. Check whether the
moving parts work perfectly and do not drag,
whether not broken or damaged to such an extent
that functioning of electric tools could be aected.
Have any damaged parts repaired before using the
machine. Poor maintenance of electric tools is a
cause of many injuries.
GB
ENGLISH
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gude TK 2400 P 55167 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gude TK 2400 P 55167 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 3,34 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info