Handleiding Gude Pro PRO 560 BS 75410 (pagina 15 van 59) (Nederlands, Duits, Engels, Frans, Italiaans)

629074

Verklein

Vergroot

Pagina terug

1/59

Pagina verder

Stopping the engine

If you want to stop the engine, release the operating lever

(automatic switch-off lever) (12).

WARNING! The knife still rotates for a few seconds after the

engine is switched off. If you want to leave the mower laying

unattended then disconnect the spark plug cap.

Important tips and advice for grass cutting!!!

Under certain conditions, e.g. when the grass is very high, it

may be necessary to set a bigger cutting height so that effort

for pushing the mower is reduced, engine overloading

removed and blocking of grass in the mower prevented. It is

possible that you will also have to reduce the mower travel

speed and/or cut the area again.

Vent ports in the grass catcher may get blocked if the catcher

is not cleaned regularly. Clean the grass catcher regularly with

water and let it dry before use.

Keep the upper part of the engine at the starter clean. Air flow

will be improved.

Cut in dry weather only.

Keep the knives sharp at all times.

Maintenance

Original spare parts are supplied by the customer service

centre and dealers. An authorised service centre is

recommended to be entitled to provide yearly maintenance

and check of safety elements. For maintenance and spare

parts, please contact your dealer.

IMPORTANT – Regular maintenance is necessary for

constant operational reliability and keeping the original

appliance output at the same level. Keep all screws and nuts

tightened so that you are sure the appliance is in an operation-

reliable condition. Regular maintenance is necessary for safety

and trouble-free operation.

Never store the appliance with fuel in closed rooms as the

evaporating fuel may ignite.

It is necessary to let the appliance cool down and empty the

fuel before storing in closed rooms.

To minimise the risk of fire, keep the engine and muffler

and the fuel tank clean and with no grass, leaves and fats.

Do not store the grass cut with the mower.

For safety reasons, avoid using an appliance with a worn

or damaged parts. Replace any faulty parts with new ones,

do not repair them. Use original spare parts and original

spare knives only.

Parts with quality different from the specified quality may

damage the appliance and put you at risk.

If it is necessary to empty the fuel tank, do so outside with the

engine being cold.

Wear solid protective gloves when assembling and adjusting

the knives.

Check the correct direction of rotating and balance of knives

after they are sharpened.

Check regularly the wear and pollution of the self-closing cover

and grass catcher.

When transporting the appliance is necessary, carry it in

hands or incline it and wear safety gloves at all times.

At all times, hold the appliance where safe holding may be

guaranteed. Consider the weight and distribution of the

appliance.

Cleaning

Clean the appliance with water, remove the grass and mud from

inside every time the appliance is to be used – it will prevent dirt

from becoming dry and problems when started the next time.

Painting inside the housing may wear down in course of time.

To prevent later corrosion of the appliance, use anti-corrosive

paint for the worn-down spots.

Once or twice a year, remove the gearbox cover and clean the

space around belt pulleys and drive belts with a brush or

compressed air.

Once per season, you should clean the inside of the drive

wheels. Disassemble both wheels. Clean the cog wheels and

their edges off the grass and other dirt with compressed air or a

brush.

Knife disassembly

For purposes of cleaning/sharpening/change

Caution!!! It is necessary to disconnect the spark plug before

disassembling.

Release the screw when disassembling the knives.

Re-assemble according to the picture. Tighten the screws. Torsion

moment of 40 Nm. You should also replace the screw when

replacing the knives.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Gude Pro PRO 560 BS 75410 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info