629068
10
Verklein
Vergroot
Pagina terug
1/82
Pagina verder
Introduction
To enjoy your new appliance as long as possible, please
read carefully the Operating Instructions and the attached
safety instructions before using it. Further, we recommend
keeping the Operating Instructions to recall the product
features in the future.
Within the continuous product development, we
reserve the right to make technical changes to
improve it.
Translation of original operating instructions
Supply includes
Take the appliance out of the transport package and check
it whether there are the following parts:
1 fretsaw
2 saw blades (1 saw blade being
preassembled)
1 saw blade cover
M5x40 saw blade cover installation screw
M5 saw blade cover installation nut
2 Allen keys (assembly tools)
1 original Operating Instructions
Warranty Certificate
Please contact your dealer if any parts are missing or are
damaged.
Appliance + accessory equipment description (pic. A-
B+D)
1. Locking screw
2. Saw blade cover
3. Saw bench
4. Saw bench insert
5. Securing screw
6. Assembly hole
7. Rubber legs
8. Saw blade storing area
9. LED lamp
10. Blowing equipment
11. Rubber leg
12. Assembly hole
13. Stroke number controller
14. On
15. Off
16. Laser On/Off
17. LED lamp On/Off
18. Connection
19. Indicator
20. Scale
21. Dust extractor adapter
22. Saw blade tension lever
23. Laser adjusting screw
24. Laser
25. Upper holder of saw blade
26. Saw blade
27. Inspection cover
28. Bottom holder of saw blade
29. Allen key T-shaped handle
30. Allen key
Technical specifications
Connection: 230 V ~ 50 Hz
Protection type: IP 20
Max. output: 120 W/P1 (S2/5 min)
Revolutions: 400-1,600 per min
-1
(controllable)
Saw blade length: 128/133 mm
Cutting output 90°: 50 mm
Cutting output 45°: 20 mm
Feeder cable: 2 m
Noise L
WA
: 93 dB
Laser wavelength 650 nm
Laser power: <1 mW
Dimensions LxWxH: 610x270x390 mm
Weight: 17 kg
Switch-on time:
The S2 switch-on time of 5 minutes (short operation) means that
the engine may only be subject to continuous load with rated
voltage of 120 W for a time specified on the type label (5 minutes).
Otherwise, the engine could get inadmissibly heated. During a
break, the engine gets cooled down to the initial temperature.
Noise emission values:
The fretsaw noise is measured according to DIN EN ISO 3722;
11/95, DIN EN 11 201. Noise in place of work may exceed 93 dB
(A). In such a case, the user must take anti-noise measures (ear
protectors to be used).
In such a case,
the user must
take anti-noise
measures (ear
protectors to be
used).
Idle running
Sound pressure level L
pA
: 82.6 dB 72.2 dB
Sound power level L
WA
92.4 dB 81.8 dB
“The given values are emission values and therefore do not have
to represent safe values in the place of work. Although there is
correlation between emission and pollutant levels, this is not a
reliable basis for determining whether or not additional safety
measures are necessary. Factors able to influence the current
level of pollutants in the place of work include the time of effects,
type of place of work, other noise sources, etc. e.g. number of
machines and other related processes. Reliable values in the place
of work may also differ in various countries. However, this
information should authorise the user to evaluate better the threat
and risk."
General instructions
After unpacking, check all parts for any damage
during transport.
Check whether the shipment is complete.
Learn with the appliance functions using the
Operating Instructions before using it.
Original accessory equipment and original wearable
and spare parts to be used only.
All covers and safety equipment must be properly
installed before putting the appliance into operation.
See the following points:
Appliance to be used with RCD (safety switch
against stray current) 30mA only!
Safety instructions
CAUTION! Laser radiation
Do not look at class 2 laser beam
Laser specifications
According to EN 60825-1:1994+A2:2001+A1:2002
Laser class 2 RLM-08
λ 650 nm P: 1 mW
10
10

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Gude-Pro-GDS-16-PRO--55097

Zoeken resetten

  • Goede dag ik heb de nr 22 spanhendel zaagblad stuk en wil graag een nieuwe bestellen.
    Voor mijn GDS 16 PRO # 55097 <PAG> groetjes Jan Viergever.
    j.viergever@home.nl Gesteld op 6-2-2025 om 16:32

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gude Pro GDS 16 PRO 55097 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gude Pro GDS 16 PRO 55097 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 4,93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info