629049
7
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
Supply includes
Picture 1:
1. Control lever
2. Compressed air connector
3. Handle
4. Stop arch
5. Circular-saw blade
6. Pneumatic joint
7. Safety switch
Appliance
9000 PRO pneumatic sheet cutter
Professional pneumatic sheet cutter suitable for small cut
radius, with a rubber-coated handle for effortless work with
minimum vibrations. Safety switch against unintentional
switching on. Stop
arch and compressed air connector with a joint to prevent air
hose from breaking.
Warranty
A warranty period of 12 months applies to commercial use
and 24 months apply to private use and commences on the
day of purchase of the device.
Warranty applies exclusively to failures due to defective
material or workmanship. An original sale slip with indication
of date of sale must be presented in case of claiming for the
warranty rights.
Warranty does not cover unprofessional use such as device
overload, violent use, damage caused by third party or foreign
materials, failure to comply with operations and assembly
manual, and normal wear and tear.
Technical data
9000 PRO
Service pressure 6.3 bar
Air consumption 170 - 220 l/min
Air connector-thread ¼”
Recomm. hose cross sect. 10 mm
Lwa noise data 82 dB
Cutting power
(steel) 2,9 mm
(aluminium) 3,2 mm
Vibration acceleration 27,2 m/sec²
Number of strokes 9000 min
-1
Stroke height 10 mm
Weight 0,65 kg
Order No. 75175
General safety instructions
Safety notice! Failing to follow these instructions
can cause an injury to you or other persons.
1. Read the following Operating Instructions for using
the pneumatic appliance and follow the safety
instructions for using the pneumatic appliance.
2. ALWAYS wear proven protective glasses, ear
protectors, a breathing mask and safety gloves.
3. Use a distribution hose.
4. The control lever cannot be used when the
appliance is being connected with air supply.
5. Disconnect the appliance from air supply if not
used. NEVER replace any parts of the accessories
or SERVICE them if the appliance is connected with
the air supply.
6. Ensure a safe distance. Make sure you did not lose
balance.
7. Ensure that your hands could freely move while
working on the appliance to be able to execute the
work safely.
8. Use the appliance only at a speed for which it has
been designed.
9. Properly maintain the appliance and follow all
instructions for appliance lubrication and
maintenance.
10. Do not damage the hoses and connecting pieces
by carrying the appliance with its hose or by
disconnecting the hose from the air supply by
pulling. Prevent the hose from coming into contact
with high temperatures, oil and sharp edges. The
hose should be replaced if damaged or worn out.
11. Store cleaning cloths and other combustible
materials in secured metal containers. The
containers must be disposed according to local,
national or regional regulations.
12. NEVER operate the appliance with an air pressure
higher than 9 bar. Use the pressure regulator that
will reduce the air pressure to 6 bar.
13. Do not needlessly use long pneumatic hoses to
avoid tripping.
14. Never use circular-saw blades that are damaged or
bent.
15. Never leave the pneumatic appliance unattended.
16. Keep the pneumatic appliance away from children
and unauthorised persons.
17. Never aim at people or animals with the air current.
18. Never put the pneumatic appliance near body holes
– it can lead to injuries dangerous to life!
19. Attention! Risk of cutting injuries by the circular-saw
blade.
Before starting
Air supply
Important information on the appliance can be found in model
specifications.
Lubricate the appliance before putting it into operation
(see the Maintenance).
Operation
Wear protective glasses! Wear earphones! Wear
safety gloves!
Before everyday use, please empty the water from the
compressor tank and blow the condensation from the air
hose.
If seal has not yet been applied on the pneumatic insertion
wrap it with a Teflon tape (picture 2 and 3)
1. Press the safety switch.
2. Carefully press the control lever down. When you
are finished with grinding, loosen the control lever
and only after that, lift the grinding machine.
3. After finishing your work, first lift the cutter and then
relieve the control lever.
Maintenance and treatment
Trained persons are allowed to execute the maintenance
works only.
Following the mentioned instructions for maintenance is a
guarantee for a long service life and trouble-free operation of
this high-quality product. Disconnect the appliance from the
compressed air source at maintenance and treatment. For
permanent faultless operation of your appliance it is
necessary to ensure everyday cleaning and regular
lubricating. Use special pneumatic oil only.
You can choose from the following options:
a) Via mist lubricator
The complete maintenance unit contains a mist lubricator
and is attached to the compressor.
b) Via lubricator on the piping
In the immediate vicinity of the appliance (in a distance of
app. 50 cm) a lubricator is installed on the piping that
supplies sufficient volume of oil to the appliance.
7
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gude Pro 9000 PRO 75175 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gude Pro 9000 PRO 75175 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 1,8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info