628645
18
Verklein
Vergroot
Pagina terug
1/49
Pagina verder
deposits in the carburettor, fuel filter and tank or fuel stabilizer
mixed to the fuel.
Do not add oil to petrol.
Refuelling is done by removing the tank lid (pic. 1; pos. 9) and
adding the fuel up to the fuel screen marking as maximum (the
fuel screen is located in the tank filling hole). Prevent fuel from
contacting your skin! Make sure fuel is always clean with no dirt!
Close the tank lid appropriately after each refuelling or
inspection.
Take the appliance to the surface you want to sweep.
Check all components if tightened well and not damaged.
Check the entire air filter for any dirt. Pic.15 shows air filter
components from the engine with the air filter lid being
unscrewed (pic. 14). All air filter components, especially the air
filter insert (pic. 15a) must be clean – cleaning agent: cleaning
petrol (adhere to the safety sheet of the given manufacturer!).
Open the fuel tap (pic. 8; pos. “ON“). Check if the socket plug is
tightened.
Starting the engine
Put the engine switch to the “ON“ position (pic. 9)
Make sure the engine is cold when being started.
Turn on the engine choke (pic. 12; pos. “CHOKE“)
Turn the speed control lever (pic. 10; pos. “START“) to full
speed.
First, pull shortly the starting cable so that it is stretched. Now
pull the starting cable slowly to the stretched position with your
left hand resting on the engine and one more strong pulling the
starting cable. Turn the engine choke off as soon as the engine
gets started (pic. 12; pos. “RUN“)
To be provided
The starting cable must not reel automatically. It must always
be reeled back by hand. If the engine fails to start even after
several attempts, check whether the tank has been refuelled
properly. Maybe there is too much fuel in the roll, which has
caused the spark plug to get damp.
Switching the engine off
Put the speed control lever to position (pic. 11; pos. “STOP“)
and switch the engine off by the engine switch (pic. 9; pos.
“OFF“). Never let the appliance run unattended if the engine is
running. Never switch the engine off if the choke is on as it
could damage the engine. Close the fuel tap (pic. 8; pos.
“OFF“). Pull slowly the starter handle so that there is some
resistance. Valves will get closed. This step is necessary to
prevent damp air from getting in the combustion chamber.
Operating mode
Ensure good stability!
Pressing the guide rod down will enable to turn the
sweeping broom in both directions by app. 20° and lock the
bar in those positions.
The appliance is moving forward when the right lever 1 (pic. 7)
is pressed.
The appliance is moving backward when the right lever 2 (pic.
7) is pulled.
Brushes are activated when the left lever 3 (picr.7) is pressed.
The cleaning appliance is fitted with a safety switch: brushes
and appliance are disabled as soon as levers are released.
The speed control lever must in dangerous situations and
accidents be put to “TOP“ and engine switched off by the
engine switch (pic. 9; pos. “OFF“).
In the operating mode, make always sure that the cooling
and combustion air is exhausted without interruption
(leaves may block the exhaust channels). Flue gas exhaust
without interruption should be ensured, too.
Supporting wheel and brush height adjustment
As soon as the brushes are slightly worn out, distance of
brushes from the ground must be adjusted again. For that
purpose, plastic rings of the brush supporting wheel must be
calibrated again.
Remove the lock rings of the supporting wheels and the
required number of plastic rings (see pic. 3a) from the
bottom side. Fit the supporting wheels again (pic. 3b). The
supporting wheel goes up and brushes are nearer to the
ground. Fit the plastic rings to the upper side and fix them
using a spacing bushing and locking ring so that the hole
distance towards the bushing remains constant (pic. 3c)
Finishing your work or breaks
After final sweeping is completed, let the appliance run free with
no load for 1 to 2 minutes (engine cooling phase)
Inspections and maintenance
Have any repairs necessarily performed by trained professional
staff only.
The socket plug must be pulled out before any
appliance changeover, adjustment or maintenance.
Safety instructions for inspections and maintenance
- Make sure petrol or oil do not leak – wear protective gloves
when working near the sweeping brush!
The sweeper, especially the sweeping brush, must be
cleaned after each use.
Maintenance, treatment, repairs, storing
General instructions
Safety instructions in particular should be followed.
Regular maintenance is necessary for perfect working of
your sweeper.
Sweeping brushes and driving components in particular must
be carefully treated to prevent damages or accidents in general.
Before maintenance:
- pull down the socket plug,
- put the appliance to a stable position,
- wait until the engine cools down.
Disassembly/assembly/change of sweeping brushes:
To enable access to the sweeping brush, the side cover of the
sweeping brush must be disassembled (pic. 17). Disassemble
the external carrying disk (pic.18 and 19). The brush and spacer
segments can now be individually removed (pic.20-22)
Cleaning
To clean/splash with water (especially using a high-pressure
cleaner):
lubricate all spots that need lubrication and let the sweeper
run for 1 to 2 minutes to allow water that has got inside to
get away.
clean the engine with just a cloth. Splash with strong
current of water as water can get in the ignition system,
fuel system and lubricating oil system, which may lead to
failures.
Technical Data
Motor: 4-stroke OHV
Output: 4.1 kW/5.6 PS at 4,000 a min
-1
Capacity: 196 ccm
Tank capacity: 3.8 l
Operating width: 600 mm
Ø sweeping roll: 350 mm
Collection container
capacity:
capacity 60 l / max. 25 l of dirt
Snow shield width: 650 mm
Approximate weight: 70 kg
Noise level: 101 dB
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gude GKM 6.5 ECO bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gude GKM 6.5 ECO in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 3,83 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info