626566
9
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
Introduction
To enjoy your new GARDEN CUTTER as long as possible,
please read carefully the Operating Instructions and the
attached safety instructions before putting the appliance into
operation. We also recommend keeping the Operating
Instructions for future reference.
We reserve making technical changes to improve the
appliance as part of the continuous product
development.
This document represents the original Operating
Instructions.
Any reprints, even partial, are subject to approval.
The machine
Light garden cutter with powerful 4-stroke engine. Robust
machine for light to medium-heavy soils. It is optimal for
cultivation of narrow plantations. Particularly calm and silent
operation. Weeding plough-blades made of special steel with
minimum wear ensure high efficiency. Thank to a special
cutter shape a considerate and efficient soil cultivation will be
ensured. Convenient operation thanks to the rotary wheel.
The system of start after pressing the button (weeding
plough-blades start running after activation of operating
button in resting state) improves the work safety in addition.
Scope of delivery (1)
1. Truck
2. Left handle (drive lever)
3. Drive lever
4. Depth limiter
5. Semibeam
6. Rotary wheel
7. Right handle (ON/OFF, speed)
8. Widening cleaver
9. Widening fender
Warranty
A warranty period of 12 months applies to commercial use
and 24 months apply to private use and commences on the
day of purchase of the device.
Warranty applies exclusively to failures due to defective
material or workmanship. An original sale slip with indication
of date of sale must be presented in case of claiming for the
warranty rights.
Warranty does not cover unprofessional use such as device
overload, violent use, damage caused by third party or foreign
materials, failure to comply with operations and assembly
manual, and normal wear and tear.
General safety instructions
It is necessary to read the whole guide for operation before
the first use of the machine. In case of any doubts associated
to the connection and operation of the machine contact the
producer (service department).
TO MAINTAIN THE HIGH LEVEL OF SAFETY PLEASE
OBSERVE THE FOLLOWING INSTRUCTIONS STRICTLY:
ATTENTION!
1. Pay attention to environmental conditions that you
work in. The engine driven machine starts producing
toxic gases after engine activation. These gases could
be invisible and without any smell. Therefore you must
never work with the machine in closed or badly
ventilated areas. Provide good illumination for your work.
If you cut in wet conditions, on snow or ice, in slopes or
in unlevelled terrain, ensure good stability.
2. Do not let foreign persons accessing to the machine.
Keep visitors and by-standers, especially children, sick
or weak persons, in a safe distance from your
workplace. Pay attention that other persons may not
touch the machine.
3. Ensure safe storage of tools. Machine that are not in
use store in a dry place at certain height if possible or
lock them so that they are not accessible to other
persons.
4. Use a proper tool for every work. Do not use e.g.
small machines or accessories for works that should in
fact be performed using heavy machines. Use machines
exclusively for purposes which they were designed for.
5. Care for suitable wear. Your clothing should be
purposeful and in may not constrain you in work.
6. Wear personal protective means. Wear safety shoes
with steel puffs and non-skid sole.
7. Wear protective glasses. Shooting up of objects by the
machine could occur.
8. Wear means for hearing protection. Wear personal
means for hearing protection like ear obturators.
9. Hand protection. Wear solid gloves – good protection is
provided by gloves made of chrome leather.
10. Transport. The garden cutter must be transported
always with the rotary wheel in transport position. When
machine is stand off pay attention that nobody could be
threatened. Secure the machine against tipping over,
damage and fuel leakage.
11. Remove wrenches etc. All wrenches etc. should be
removed before the machine is started.
12. Stay always attentive. Pay attention to what you do.
Follow your common sense when working. Do not
operate engine-driven machines when tired. Do not
operate the engine being under influence of alcohol,
drugs or medicaments that aggravate the ability to
concentrate.
13. Refilling the fuel. Before refuelling it is always
necessary to stop the engine. Open the tank cover
always carefully to allow the over-pressure ventilate
slowly to avoid squirting the fuel. When working with the
machine high temperatures are generated at the
machine body so let the machine cooled down before
refuelling otherwise fuel ignition could occur resulting in
serious burns. Be careful not to overfill the tank when
refuelling. If the fuel flows out nearby it must be removed
immediately and the machine must be cleaned. Check
firm settlement of screw cover after refuelling to avoid its
loosening due to vibrations during operation.
Behaviour in case of emergency
Provide necessary first aid treatment corresponding to the
injury nature and seek qualified medical help as soon as
possible. Protect the injured person from other injuries and
calm him/her down.
First aid kit must always be available in the place of your
work in case of accident in accordance with DIN 13164.
Material taken out of the first aid kit needs to be
supplemented right away.
If help is needed, please provide the following details:
5. Place of accident
6. Accident nature
7. Number of injured persons
8. Injury type
9
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gude GF 600 94369 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gude GF 600 94369 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 3,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info