Introduction
To enjoy your new electric tiller as long as possible, please
read carefully the Operating Instructions and the attached
safety instructions before putting the appliance into
operation. We also recommend keeping the Operating
Instructions for future reference.
We reserve making technical changes to improve the
appliance as part of the continuous product
development. Pictures may therefore differ.
This document represents the original Operating
Instructions.
Supply includes
Take the appliance out of the transport container and
check whether there are the following parts:
Pre-assembled appliance unit(12)
1 bottom part including handle(10)
1 upper part including handle(11)
1 bag including bolts(1-7)
If any parts are missing or are damaged, please contact
your dealer.
GF 300 E technical specifications
Voltage/frequency: 230V~50Hz
Engine output: 750 W
Protection type: IPX4
Protection class: II
Working revolutions: 400 per min
-1
Max. operating width: 300 mm
Max. cultivation depth: 220 mm
Tiller blade: 4 pcs/220mm Ø
Noise: L
WA
93 dB
Weight: 7.4 kg
General safety instructions
Please read carefully these Operating Instructions. Learn
the operating elements and the appropriate way of using of
this appliance. Keep the Operating Instructions for future
reference.
Keep your place of work clean!
Mess in the place of work may lead to injuries.
Consider the environment
Do not expose the appliance to rain.
Do not use the appliance in a wet or moist environment.
Provide adequate lighting.
Do not use the appliance near flammable liquids or gases.
Keep other persons in safe distance!
Do not let other persons, especially children, keep the
appliance and cable. Keep them in a sufficient distance
from the place of your work.
Store the appliance properly!
If not being used, the appliance should be kept in a dry,
locked place out of reach of children.
Do not overload the appliance!
Work within the specified output range.
Use the right appliance!
Do not use the appliance for purposes for which it has not
been designed.
Look after your appliance!
Follow the servicing regulations and appropriate
instructions.
Check regularly the appliance cable and have it replaced
by an authorised professional if damaged.
Check regularly the extension cable and replace it if
damaged.
Keep the handles clean with no sign of oil and grease.
Be careful!
Pay attention to what you are doing. Use common sense
when working. Do not use the appliance when you are
tired.
CAUTION!
Use of any other accessory equipment may lead to a risk
of injury.
Have your appliance repaired by a professional only!
This appliance corresponds to appropriate safety
regulations. Repairs may only be executed by a
professional, using original spare parts; otherwise, the
user will face a risk of injury.
Never mill if there are persons, especially children, around.
Mill under adequate visibility only.
Appliance-specific safety instructions
Rotating knife
Perform any work/adjustment on the appliance only when
the engine is switched off, appliance unplugged and the
knife unit idle.
Before you start working
Work only with solid shoes and long trousers; never work
when barefooted or in sandals.
Check the ground where the appliance is to be used for
items that may get caught and be thrown-away by the
knife unit and remove such items (stones, branches, etc.).
Check the appliance cables for any damage and age
(fragility) and have them repaired by an electrician if
necessary.
Before using the appliance, check (visually) the knife unit
and their fastening means for any damage.
