622222
11
Verklein
Vergroot
Pagina terug
1/80
Pagina verder
Cuation: The indicators will light at overloading only.
Thermal protection is provide on the unit to switch off the
welding current supply automatically as soon as the inner
temperature. As it drops to a value of correct operation, the
unit switches on again.
Step-by-step Instructions
The welding area should be free of any rust and varnish. The
electrode is selected by the type of material. It is
recommended to test the electrode and the current intensity
on scrap at the beginning. Place the electrode ca 2 cm above
the starting point. Always use a welding shield, welder’s
gloves and protective clothing. Touch the piece and slightly
pull the electrode.
Wrong
(arc too long)
Correct
(ca 1 – 1.5 multiple of the
electrode diameter)
Precise length of the arc is critical as the current and voltage
intensity varies. Poor intensity of current makes both the weld
and resistance worse. The electrode angle support should be
70-80 degree forward with regard to the piece worked. Too
big angle makes the slag slide under the edging material. If
the angle is too small, the arc will fluctuate and splash. In
either of the cases the wells is porous and weakened
Wrong
Wrong
Correct
The slag should not be removed before the weld gets cooled.
Continue welding of an interrupted weld after the slag is
removed.
Wrong
Correct
The welder should try to keep the arc length constant. As the
electrode gets worn, it should typically get nearer. It is
recommended to remove the electrode in the direction of the
weld to avoid forming a porous crater.
Signs on Unit
Meaning of symbols
Following symbols are used in this instruction/on the unit:
Product safety:
Product corresponds to
applicable EU standards
Attention!
Before handling, read the
operating instructions!
Prohibitions:
General ban combined with
another pictograph!
No pulling he cable!
Do not use in rain!
Warning:
Warning/Caution
Warning against dangerous
voltage
Commands:
Read operating manual
before use
Safety gloves to be used!
Wear protection shoes Welding helmet to be used
Wear protection clothing Unplug before opening
Environment protection:
Dispose waste
professionally so as not
harm the environment.
Packing cardboard material
may be delivered to collecting
centres for recycling.
Any defective and/or
disposed electric or
electronic devices must be
delivered to respective
collection centres.
Interseroh-Recycling system
with serial number
Package:
Protect against moisture!
Caution – Fragile!
This side up!
Technical specifications:
11
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gude GE 185 F - 20004 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gude GE 185 F - 20004 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 3,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info