580331
11
Verklein
Vergroot
Pagina terug
1/46
Pagina verder
PX/QX/RX Version 4.20 User Manual – Issue B
- 11 -
Keyswitch/Radio Keyfob Setting
As an alternative to setting and unsetting from a keypad, your system may be fitted with an optional
keyswitch, which permits setting and unsetting of a group by operating a keyswitch. The keyswitch
may be configured for any set mode. If your system is fitted with a radio interface then a radio Keyfob
may be programmed for setting.
Automatic Setting
The system may have been programmed by the installation engineer to automatically set all or parts
of the system according to a pre-programmed schedule. The schedule will have been programmed to
take into account the normal closing time, non-working days and holidays. The schedule may be
configured for any set mode.
Aborting The Setting Procedure
The setting procedure can be aborted at any time during the exit time by pressing on the keypad
that was used to start setting, logging on to any other keypad, turning a keyswitch to the unset
position or an appropriate radio Keyfob.
Setting with Warnings
The system will automatically display any conditions that the user should be aware of before setting
the system. These conditions are described as set warnings and do not prohibit the user from setting
the system in the normal way.
Workshop
Seconds Left-005
1=Workshop
2=Office
1
Loading Door
Isolated
=Set
The set warnings include:
1. Bypassed circuit(s)
2. Circuit(s) on soak test has failed (a special circuit test mode set up
by the installation engineer)
3. Isolated circuit(s)
4. Line Fault (only when setting with telephone line fault is allowed)
5. Shunted circuit(s)
6. Battery test faults, when setting is allowed with this type of fault.
7. 230v mains faults, when setting is allowed with this type of fault.
Easy Set
If easy set mode 1 is programmed then the system will start to part set when you log on. During the
part set exit time, if the exit door circuit is opened and closed, the system will full set. Pressing the
key during the setting time will cancel setting. If easy set mode 2 is programmed then the system
can be set without logging on to a keypad. Up to 8 parts can be set in this way (depends on the
control panel type). For example to set part 1 of your system from 1 +
. The system can be set by
entering 0 +
.
If using a mini keypad then the house symbol buttons can be used to set.
+ = set first group or area.
+ = set second group or area.
and
+ = set first and second group or area.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Guardall QX bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Guardall QX in de taal/talen: Engels als bijlage per email.

De handleiding is 0,41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Guardall QX

Guardall QX Gebruiksaanwijzing - Nederlands - 31 pagina's

Guardall QX Installatiehandleiding - English - 46 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info