ENGLISH
67
IMPORTANT INFORMATION
___________________________________________________
5 Select the »Factory Defaults« row using the »
P+, P-
« buttons then confirm
with »OK«.
– A dialogue box appears on the picture screen.
6 If not yet done, select the »Yes« option using the »
P+, P-
« buttons then
confirm with »OK«.
– The satellite receiver is reset to the factory settings and these are auto-
matically saved.
7 Select the »Remove All Services« row using the »
P+, P-
« buttons then
confirm with »OK«.
– A dialogue box appears on the picture screen.
8 If not yet done, select the »Yes« option using the »
P+, P-
« buttons then
confirm with »OK«.
– All changed settings of the satellite receiver are cancelled.
Note:
If you want to control two satellite receivers DTR 61xx with only one
remote control TP 760 S, you must select for one satellite receiver a different
remote control code.
9 Select the »Remote Control« row using the »
P+, P-
« buttons then
confirm with »OK«.
– A dialogue box appears on the picture screen.
10 Select the appropriate option, e.g. »SAT2«, using the »
P+, P-
« buttons then
confirm with »OK«.
– This satellite receiver then is controlled with the »SAT2« remote control
code, the other satellite receiver with the »SAT1« remote control code
(= factory setting).
11 Press »Z« to return to the »System Setup« menu, or
press »Ǻ Menu« to end the settings.
Factory Settings
Exit Back
SAT 1
Factory Defaults
Remove All Services
Remote Control
Factory Settings
Exit Back
SAT 1
Factory Defaults
Remove All Services
Remote Control
