RADIO (TUNER) MODE
___________________________________________________________________________________________
ENGLISH
9
Activating and deactivating the AF
function
1 To switch it on and off, press »I
I
I
« until AF
ON or AF OFF appears in the display.
– Display: »AF ON« when the AF function is
on.
Note:
You can only activate or deactivate the AF
function for RDS stations which broadcast
alternative frequencies.
Intelligent search (IS)
The intelligent search first stores RDS stations,
followed by the other stations in order of signal
strength. When the IS search is completed up to
30 stations are stored. You will hear the station
with the best reception. The IS is always activ-
ated, unless you have selected another search
function.
DAB note
If you enter a new DAB broadcasting region,
you can start the IS search to check whether
you are able to receive new ensembles.
Intelligent search (IS)
1 Press the upper soft key to select IS.
2
Start the search with the lower soft key (GO).
– Display: »IS---·«.
Note:
However, you can stop the search by press-
ing one of the station buttons »1« – »5« or
the advance button.
Viewing the IS memory
1 Once the IS search is complete, use the
rocker switch to select the station you
want to hear.
– Display: »IS-Scan«.
Tuning to stations with station
search
1 Press the upper soft key to select SRC.
2 Press the rocker switch to start the search
in the desired direction.
3 If a station is found, its code appears in the
display.
Scan function
You can hear stations which can be received for
10 seconds each.
1 Press the upper soft key until »SCN«
appears in the display.
2 Use the lower soft key (»CLR«) or the
rocker switch to end the scan function. The
last station selected is played.
Additional TP functions
1 To interrupt the current traffic news briefly
press the TP button.
– The device remains in standby mode for
the next announcement.
2 Press TP again to switch off the traffic news
standby. The TP symbol disappears from the
display.
3 You can preselect the volume for all traffic
announcements. To set it, select the EXPERT
level (see page 13).
4 If you only want to hear traffic news, press
TP to activate the TP function and then turn
the volume knob to zero.
Viewing the PAD/radiotext
1 Press DISPLAY.
2 The upper soft key switches to date, time and
one-line radiotext.
3 The lower soft key switches to two-line radio-
text.
