ENGLISH
21
RDS station service
RDS (Radio Data System) is an information system which is trans-
mitted additionally by most FM stations.
When the hi-fi system is receiving an RDS station, the station name,
for example »FANTASY«, and »f« appear in the display.
Note:
It may take some time before all the RDS information is
available.
Searching for RDS stations
1 To search for an RDS station, press »UP TUNING/ ALBUM
DOWN« repeatedly until »f« appears in the display
indicating that an RDS station is being received.
– After a short time the station name appears if the reception
strength is sufficient.
RDS time synchronisation
Some RDS stations transmit an RDS time signal. If reception is good,
this time information will update the time if you have selected the
»CT ON« option.
Time synchronisation can take several minutes, and even with good
reception the accuracy depends on the time signal being transmit-
ted. The automatic time setting is always activated when the hi-fi
system is switched from standby mode into tuner mode and receives
a suitable RDS station (when the system is waiting for an RDS time
signal, »
Ȅ
« flashes. »
Ȅ
« stays lit once RDS time synchronisation is
complete).
Calling up RDS information
When an RDS station is being received, the frequency is displayed
briefly and then the station name appears continuously.
1 Press »DISPLAY« on the remote control.
– The station type appears in the display (PTY).
2 Press »DISPLAY« on the remote control again.
– The radio text (TEXT) appears in the display as ticker text.
3 Press »DISPLAY« on the remote control again.
– The current time and day of the week appear in the display.
4 Press »DISPLAY« on the remote control again.
– The wavelength and the frequency appear in the display.
5 Press »DISPLAY« on the remote control one last time.
– The station name is displayed continuously once again.
TUNER MODE
_______________________________________
P02
FANTASY
f
PROG
!
P02
FM 100.60
f
PROG
!
P02
INTERNET:WWW.RADIO-FAN
f
PROG
!
MHz
