ķ
19
GB
A4 12 V ignition voltage
– Connect to terminal 15, if you wish to
switch the car radio on and off with the igni-
tion/start switch.
– Connect to terminal 30. The car radio can-
not be switched on and off with the ignition/
start switch.
If the ignition is switched off, the radio is not
switched off after one hour and the Security
LED does not flash.
ǺǺ
To ensure a correct operation of the radio,
this contact must always be connected to
terminal 15 or 30.
A2 Phone mute connection
for car telephone or CB radio.
The car radio is “muted” when the car tele-
phone or CB radio is in operation.
The display indicates ”PHONE”, see page 14,
EXPERT setting
8.
For this, the blade contact A2 must be
connected from the mute output of the tele-
phone/CB radio to earth!
Loudspeakers
Blade contacts B: Figure +
Maximum output power
With 4Ω loudspeakers: 4 x 7 W.
With adapter supplied: 2 x 20 W in 4 Ω.
Front speakers Rear speakers
B3 right-hand +B1right-hand +
B4 right-hand –B2right-hand –
B5 left-hand +B7left-hand +
B6 left-hand –B8left-hand –
If you wish to connect only two
loudspeakers:
Use the adapter supplied (Fig.
O) to combine
the four 7 W loudspeaker outputs to two 20 W
outputs. For this, connect the 20 W adapter to
the socket B (Fig.
+).
Connection of the front speakers (see above)
is not changed but the rear sockets remain
free.
í
Do not electrically connect speaker
connections to each other and do not
connect to chassis!
Additional connections
Blade contacts C: Figure +
CD changer and AUX connection
C13 CD bus control line. For AUX mode,
connect with C15.
C15 CD bus, earth.
C16 +12 V supply voltage for CD changer.
C17 Switching voltage for CD changer.
C18 CD-AF/AUX-AF, earth.
C19 CD-AF/AUX-AF, left.
C20 CD-AF/AUX-AF, right.
Line output
Connection for booster or active speaker.
Appropriate adapter:
Adapter 416 (order No G.ID 16-00).
C11 Rear speaker, left +
C12 Rear speaker, right +
C13 Earth –
C14 Front loudspeaker, left +
C15 Front loudspeaker, right +
C16 Switching voltage for booster on/off
(max. 0.3 A).
The total current consumption resulting
from the connections C17, C6 and A5 is not
allowed to exceed 0.5 A.
Installation and Removal
