ENGLISH
13
CONNECTION AND PREPARATION
_______________________________________
Connecting headphones
1 Insert the headphone plug (ø 3.5 mm) into the »0« socket on the front of
the HiFi system.
– The loudspeakers of the HiFi system are switched off.
Connecting the power cord
Note:
Check that the mains voltage on the type plate (on the back of the HiFi
system) corresponds to your local mains supply.
The only way to isolate the HiFi system from the mains supply is to pull the
plug.
1 Plug the mains cable supplied into the »AC~« socket on the HiFi system.
2 Insert the power cord plug into the socket.
Inserting batteries in the remote control
1 Open the battery compartment by pushing down the lid of the battery com-
partment.
2 When inserting the batteries (mignon type, e.g. AA, R6, UM3), observe the
polarity marked on the base of the battery compartment.
Note:
If your HiFi system no longer reacts properly to remote control commands,
the batteries may be flat. Always remove flat batteries. No liability is accep-
ted for damage resulting from leaking batteries.
Environmental note:
Batteries, including those which contain no heavy metal, may not be dispo-
sed of with household waste. Please dispose of used batteries in an environ-
mentally sound manner. Find out about the legal regulations which apply in
your area.
