ķ
23
GB
EXPERT
Volume
ßE Speed dependent volume
» SCVOL « (0 … 67)
Setting is only possible if a speed depend-
ent signal is emitted at the
SCV connection (A1).
» SCVOL - - - «: SCV switched off
» SCVOL 0 67 «: Maximum effect
The resulting increase in volume is indicated
by the left digit (or digits).
For experts: Numerical value x 1.25 = volume
increase in db (max. 20 db).
Exam
ples:
» SCVOL 16* 67 « : Maximum set effect.
Maximum volume
increase
» SCVOL 8* 67 « : Maximum set effect.
Medium volume increase
*
These numbers appear only while the vehicle is in mo-
tion and of acorresponding speed.
A change of this number occurs only while
the vehicle is in motion
(condition: Setting EXPERT Menu).
í For reasons of traffic safety, the fol-
lowing adjustment should be done by the
passenger!
Adjustment:
1. Vehicle is stopped, engine is running:
Set desired volume with
¢¢
rotary knob.
2. Prepare EXPERT setting:
Hold down
“
LOUD
EXPERT
button until signal tone
sounds. Turn
¢¢
rotary knob until
» SCVOL ...« in the display. Press
“
LOUD
EXPERT
button briefly until »E « appears.
3. For higher speed:
Set desired volume with
¢¢
rotary knob,
e.g. » SCVOL 60 « in display.
Hold down
“
LOUD
EXPERT
button until signal tone
sounds.
Acoustics system
You can adjust the bass and the treble for the
front and the rear speakers separately.
You can adjust the settings between –3 and
+
3 with the
¢¢
rotary knob.
ßR Bass – front speakers
»BAS F 0« (F = Front)
ßT Bass – rear speakers
»BAS R 0« (R = Rear)
ßZ Treble – front speakers
»TRE F 0« (F = Front)
ßU Treble – rear speakers
»TRE R 0« (R = Rear)
´I Switch-on/off delay for connected booster
(Switching voltage for booster = contact C6)
» BDLY ... « (O6 … 99)
In case of “switching noises”: increase or
decrease set value until switching noises
are no longer audible.
´? AIM function (on/off)
» AIM ON « or
» AIM OFF « – no AIM memory standby
when car radio is switched off
´` AIMT standby
» AIMT 2:00 «
Period of time during which traffic announ-
cements are recorded after the device has
been switched off.
Available settings:
min. 1 minute, max. 4 hours.
´Q AIM TIMER 1 (switch-on time 1),
➭
page 13: AIM function.
Current time is set:
1 or 2!
» T 1 OFF « : TIMER 1 is off
» T 1 23:59 «ɫ » T 1 OFF «ɫ » T 1 00:01 «
Turn
¢¢
rotary knob quickly:
quick change of the switch-on time.