ķ
5
GB
Volume and sound settings
Example: setting the bass
Press the
¢¢
SOUND
button
repeatedly briefly
until the following appears in the display:
With the Q VOLUME buttons W you can
change the level of the bass.
If you would like to immediately change the
bass setting back to the medium setting:
Press the
¢¢
SOUND
button
, until the signal
tone can be heard.
LOUD (Loudness)
Switching the loudness on improves the
sound at low volumes.
You can switch the function on and off from
the basic setting.
Volume
Set the desired volume with the
Q
VOLUME
W
buttons.
»VOL 00« … »VOL 46« appears in the dis-
play.
Sound settings
For the settings FADER, BASS, TREBLE,
BALANCE:
1. Select functions by pressing the
¢¢
SOUND
button one or more times briefly.
2. Select the desired sound level with the
Q
VOLUME W buttons
or
select the basic setting:
Press
¢¢
SOUND
until the signal tone can be heard.
3. Ending the setting:
Press
¢¢
SOUND repeat-
edly until the set station is displayed again.
ǺǺ After approx. 10 seconds, the control level
with the current settings is reset automati-
cally.
Press the
¢¢
SOUND button until you hear two
signal tones. You see
»LOUD ON« (on) or »LOUD OFF« (off).
FAD (Fader)
With the fader, you can set the “volume distri-
bution” between the front (“F” Front) and the
rear (“R” Rear) sets of speakers.
BAL (Balance)
Balance is the “volume ratio” between the left
and right speakers.
Buttons
Q
VOLUME W
¢¢
SOUND button
