28
Programming a timer position
1 Call up the »Timer« menu directly using the green »
Ȅ
« button, or
call up the »Main Menu« using the »Ǻ Menu « button, and then select the
»Timer« menu row and call it up.
2 Select the »Channel List« directly using the yellow »
@
« button.
– The channel list is superimposed on the »Timer« menu on the picture
screen.
3 Select the desired service position using the »
P+, P-
« buttons, and then
press the »OK« button to transfer it into the »TIMER« menu.
– The channel list disappears from the picture screen, the selected services
and the current date have been transferred into the »TIMER« menu.
– The first position of the date is highlighted.
4 Confirm the current date with »OK«, or
enter the desired date (day, month, year) always as 6 digits using the
numbered buttons »1 … 0«. The entries are automatically confirmed.
– The first position of the start time is highlighted.
Note:
To make sure that the desired programme will still be recorded in its entirety,
even if there is a change in the broadcasting time, when programming the
timer data you should always set the start time a bit earlier and the stop time
sufficiently later than the times indicated in a programme magazine.
5 Confirm the Start time (= current time) with »OK«, or
enter the start time (0/24 hours, minutes) always as 4 digits using the num-
bered buttons »1 … 0«. The entries are automatically confirmed.
– The first position of the stop time is highlighted.
Note:
Make sure the stop time is not earlier than the start time the same day.
TIMER PROGRAMMING
___________________________________________________________
Timer
Services Date Start Stop
e
Exit Back
Delete Channel List
