26
TIMER PROGRAMMING
____________________________________________________________
Enter stop time (
ѕѕ
●■)
Note:
Make sure the stop time is not earlier than the start time.
If a stop time is entered which lies before the start time, the Timer remains activated until the stop
time is reached next day
4 Select the »
ѕѕ
●
■
22:03« row using the »
..
« button.
5 You may switch between hours (0 … 23) and minutes (0 … 59) using the »
..
« button.
Press the »
,,
« button to switch back from minutes (0 … 59) to hours (0 … 23).
6 Enter the stop time using the »1 … 0 « buttons, or select it using the »
;;::
« buttons.
Activating the timer function (
ȄȄ
)
7 Switch on the timer function (
✓✓
) using the »
;;
« or »
::
« button.
8 Save the setting with the »OK« button.
The main menu is displayed on the screen again.
9 Exit the menu by pressing the »
Ǻ « button.
10 The receiver must be switched to standby using the »
Ǽ« button before the start time is reached.
On the front panel of the receiver the green »
–
« is lit up as well as the red »● «.
This shows that the timer of the receiver is programmed.
Pre-programming the video recorder
Do not forget to pre-programme your video recorder accordingly for the timer recording.
ѕ 2
??
003
ѕ ●
ı
WED WEEK 2
ѕ ●
ı
20:15
ѕ ●■ 22:03
ѕ –
ѕ 19:28 SUN
Ǻ / OK
