´T
0
…9 – The desired programme position is directly selected with the numeric buttons, e.g. P 123.
When selecting a multi-digit programme position, the numbers are entered in sequence from
left to right. For example, enter 1, 2, and 3.
When you enter the digit 1, the following appears in the display:
If no further entry is made, the display switches automatically to the single digit programme
position P1.
You can choose up to 199 SAT programme positions and 99 radio programme positions.
– In frequency mode:
Directly enter the reception frequency of the receiver. The first digit is omitted, for example:
ARD (Astra): 11494 MHz
Entry: 11494 MHz
– In audio mode, directly enter the sound carrier frequency, e.g., 7.02 MHz.
– Timer progamming: Enter the start/stop time.
– Switch the receiver on from standby.
´Z
¢
TV
Certain TV sets switch automatically in the AV mode when the SAT receiver is switched on. The
¢
TV button enables you to switch back to terrestrial mode.
´U
.
For opening and closing the Timer menu (on-screen display).
qI
-
Shift button for switching to the SAT remote control level 2.
q?
– Step-by-step programme position selection and switching on from standby.
– For selecting lines in the Timer menu.
q`
O Status indication: The station names for both reception units (A and B) are displayed.
Pressing longer than 3 s: Entry or correction possibility for the station name.
qQ
– In Timer mode: Timer on/off, programming a station name.
– In TV mode: Setting the volume level of the TV set.
Remote Control Buttons
ķ
6
Important operating functions and basic settings can be car-
ried out with the universal remote control TP 720 SAT.
Please insert the battery included observing correct polarity.
The marking for this is on the compartment bottom. Close
the cover.
Change the exhausted battery in time. We cannot be held
reponsible for damages resulting from an exhausted battery.
Buttons
PI
––
]
x
“
c
|
]
¢
“
¢
|
