14
ENGLISH
14
EXPERT LEVEL
_______________________________________________________________________________________________________
6 To carry out the next setting repeat steps 2 to
5.
7 To quit expert level keep pressing SOUND
until you hear the signal.
The individual settings
1: Language
– English, German, French,
Italian: the selection of display languages.
2: Pr
otection – Code settings to prevent theft –
see the detailed instructions starting on page
16.
3:
ON Volume – Volume limit when switching
on.
– Display: »ON Volume ––«: no limit.
– Display: »ON Volume 00« to »ON Volume 30«:
a limit is entered.
4: Loudness
– Boosts low frequencies at low
volumes
– Display: »Loudness« »low«, »normal« or
»high«.
5: SCV
– Speed Controlled Volume
– Display: »SCV: Off«. SCV 1...140.
9: Beep – Signal tone on/off
– Display: »Beep On« – Signal tone for confirming
functions.
– Display: »Beep Off« – Functions are confirmed
by a brief muting of the loudspeakers.
1
0: AM Band – On/off
– Display: »On« – The AM range can be selected.
– Display: »Off« – The AM range is switched off.
1
1: SW Band – On/off
– Display: »On« – The SW range can be selected.
– Display: »Off« – The SW range is switched off.
1
2: Search level– Search sensitivity
– Display: »Local« – Reduced search sensitivity.
– Display: »DX« – Immediate increased sensitivity.
1
3: RDS Re
gional – Automatic changing of the
regional station
– Display: »On« or »Off«
– Display: »RDS Regional On« – Frequency
change only possible between regional stations.
– Display: »RDS Regional Off« – Station change
via automatic search.
1
4: Date Format
– Display: »DDMMYY« or »YYMMDD«
1
5: Clock »On«, »Off« or »RDS« (RDS synchro-
nisation)
Note: With RDS synchronisation, settings 16 -
18 disappear. When Time is Off, settings
15-19 disappear.
A setting is only possible if there is a speed con-
trolled signal at the SCV connection (A1).
» SCV: Off« : SCV is switched off
» SCV: 140 « : Maximum effectiveness
The speed change while driving is shown in the
top right section of the display, e.g. +4.
6:
TP Mode – TP function on/off
- Display: on/off
When TP is »off«, the »TP« button is inactive.
7:
TP Volume – Minimum volume for radio traf-
fic news.
– Display: »TP Volume 5« to »TP Volume 30«.
Volume level, bordered display.
8: Phone
– Muting in car phone mode.
– Display: »Mute« – Muting of the car radio is
activated.
– Display: »Off« – Muting of the car radio is
not activated.
– Display: »On« – You hear the phone via the
speakers.
Note:
The phone mute signal (see page 17) must be
connected.
