ENGLISH
31
Switching on and off
1 Switch on the device with the required input source by moving the switch »CD
TAPE/OFF RADIO« to the corresponding position.
2 Move the »CD TAPE/OFF RADIO« switch to the »TAPE/OFF« position to switch off
the device.
Selecting the input source
1 Select the input source (CD or RADIO) using »CD TAPE/OFF RADIO«.
Adjusting the volume
1 Adjust the volume with »VOLUME«.
Switching the Ultra Bass System on and off
This function boosts the bass frequencies.
1 Switch the Ultra Bass System on and off with »UBS«.
Listening with headphones
1 Connect the headphones to the »0« headphone jack (ø 3.5 mm).
– This switches off the loudspeakers.
GENERAL FUNCTIONS __________________________________
RADIO MODE _________________________________________________
Antennas
1 For FM stations (VHF) extend the telescopic antenna.
Note:
If the FM signal is too strong, it is advisable to push in the telescopic antenna.
2 The radio recorder has a built-in rod antenna for MW reception. Turn the radio recorder
about its own axis to point the antenna.
Selecting the radio input source
1 Move the »CD TAPE/OFF RADIO« switch to the »RADIO« position.
Setting and storing radio stations
Automatic station search
1 Select the frequency band (FM or MW) using »
7
BAND«.
2 Activate the station search by pressing »PROG/MEM« until the frequency display
changes to rapid run-through.
– The device searches for up to 10 radio stations and then saves them. After the search
has finished, the station stored in position 01 can be heard.
