❒
Mains voltage:
220 – 240V, 50/60 Hz
(control range of the power supply unit 190 … 264V)
❒
Power consumption:
Set in Set in Sound output Sound output
operation standby Music power Sine power
approx. 155 W 6 W 80 W 2 x 10 W + 20 W
Subject to alterations.
E. and O.E.
❒
Channels:
C01 … C 99
Special channels S 01 … S41
❒
Norm:
PAL; SECAM; NTSC 4.43 MHz; BG,
NTSC 3.58 MHz via AV
❒
Service hint for the specialist:
The set may only be operated supplied power cable
set. It prevents interference from the mains and is an
integral component for the set’s approv-al.
For a replacement, consult your nearest customer
service centre and order only the power supply
cable set with the following designation » GWN
9.22/ number 8290.991-316 «.
The product fulfils the requirements of the
following EU guidelines:
73/23/EEC Guideline concerning electrical operating
units within certain voltage limits.
89/336/EEC guideline on electro-magnetic compa-
tibility.
The unit is accordance with the norms:
EN 60065, EN 55013, EN 55020
❒
Additional equipment:
The set has been prepared for satellite reception,
Dolby Surround Pro Logic, connecting a PC and PIP
(Picture in Picture). With the built-in PIP function,
another TV programme or an AV picture (e.g. from a
video cassette recorder or a video camera) can be
superimposed as a small picture. Ask your dealer.
Additional Information for Units sold in Great Britain
Units sold in GB are suitable for operation from a 240 V AC, 50 Hz mains supply.
In case this appliance is supplied with a Safet
y Standard Approved mains lead fit-
ted with a non-rewireable 13 Amp mains plug which, if unsuitable for your
socket, should be cut off and an appropriate plug fitted by a
qualified electrician. The fuse and fuse holder must be removed from the plug as
accidental insertion of the redundant plug into a 13 Amp socket is likely to cause
an electrical hazard.
Note: The severed plug must be destroyed to avoid a possible shock hazard
should it be inserted into a 13 Amp socket elsewhere.
If it is necessary to change the fuse in the non-rewireable plug, the correct type
and rating (5 Amp ASTA or BSI approved BS 1362) must be used and the fuse
cover must be refitted. If the fuse cover is lost or damaged the lead and plug must
not be used until a replacement is obtained. Replacement fuse covers should be
obtained from your dealer.
If a non-rewireable plug or a rewireable 13 Amp (BS 1363) plug is used, it must
be fitted with a 5 Amp ASTA or BSI approved BS 1362 fuse. If any othe type of
plug is used it must be protected by a 5 Amp fuse either in the plug or at the dis-
tribution board.
Important:
The wires in the mains lead are coloured in accordance with the follow-ing code:
BLUE – NEUTRAL
BROWN – LIVE
As the colours of the wires in the mains lead of your appliance may not corre-
spond with the coloured marking identifying the terminals in your plug, proceed
as follows:
Connect the BLUE coloured wire to plug terminal marked with the letter "N" or
coloured black.
Connect the BROWN coloured wire to the plug terminal marked with a letter "L" or
coloured red.
In no circumstance must any of the wires be connected to the terminal marked
with a letter "E", earth symbol , coloured green or green and yellow.
Replacement mains lead can be obtained from your dealer.
