570082
14
Verklein
Vergroot
Pagina terug
1/27
Pagina verder
ENGLISH
14
SETTINGS
---------------------------------------------------------------------------------------------------------------------------------------
3 Press »INFO« on the remote control to switch
to the time display for the DAB radio station
and confirm the time with »eII«.
Display: »CT SYNC«, the time is adopted.
Note:
7
Some RDS stations (FM radio stations) trans-
mit an RDS time signal. If the selected RDS
station transmits time information, the time
can be updated automatically.
In FM tuner mode, press »RDS« repeat-
edly until the time is displayed. If »DATE/
CLOCK« is displayed, the time signal has
not yet been received. Please wait until the
time is displayed.
If the correct time is displayed, press and
hold » « to confirm it.
Setting the time manually
The time can also be set manually.
1 Switch off the hi-fi by pressing »8«.
2 To set the time in standby mode, press and
hold »¥« for about 2 seconds.
Display: »CLOCK SET« and then
»CLOCK 24 HR«.
2 Select the hour format (12 or 24 hours) by
pressing »VOLUME« on the device or by
pressing »5« or »6« on the remote control
and confirm with »¥«.
The hours flash.
3 Set the hours by pressing »VOLUME« on the
device or by pressing »5« or »6« on the re-
mote control and confirm with »¥«.
The minutes flash.
4 Set the minutes by pressing »VOLUME« on the
device or by pressing »5« or »6« on the re-
mote control and confirm with »¥«.
– Display: the current time.
Setting and storing FM radio
stations automatically
The device searches for up to 40 stations with
strong reception and stores them automatically.
After the search has finished, you will hear the
station stored at preset 01.
1 Activate the station search by pressing
»PROG« until the frequency display changes
to rapid run-through.
Display: »AUTO SCAN«.
Setting and storing FM radio
stations manually
1 Set the radio station by briefly pressing »3«
or »4« repeatedly on the remote control.
Display: the frequency changes in steps of
50 kHz;
or
press and hold down »3« or »4« on the
remote control until the frequency changes to
rapid run-through.
2 Save a radio station as a preset by pressing
»PROG«, selecting the preset with »5« or
»6« on the remote control and then press
»PROG« to save.
3 To search and save more radio stations, repeat
steps 1 to 2.
Setting the time automatically
The time is updated automatically if a DAB or
RDS radio station transmits a time signal.
Note:
7
The time must be reset after a power failure
or after disconnecting from the mains.
1 Select the DAB input source by pressing
»SOURCE« on the device or »FM/DAB« on
the remote control.
2 Select a DAB radio station by pressing » « or
» « on the device »5« or »6« on the remote
control.
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Grundig M 2200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Grundig M 2200 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,88 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Grundig M 2200

Grundig M 2200 Gebruiksaanwijzing - Nederlands - 17 pagina's

Grundig M 2200 Gebruiksaanwijzing - Deutsch - 27 pagina's

Grundig M 2200 Gebruiksaanwijzing - Français - 30 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info