645170
28
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
C
Additional laundry may be loaded
during the End Time countdown
period. At the end of the countdown,
End Time indicator turns off,
washing cycle starts and the time
of the selected programme appears
on the display.
When the End Time selection is
completed, the time appears on
the screen consists of end time
plus the duration of the selected
programme.
Changing the End Time duration
Press the End Time button. Every time
the button is pressed, the period will
change in 3-hour increments and the
light of the selected End Time will turn
on.
Cancelling the End Time function
If you want to cancel the End Time
countdown and start the programme
immediately:
* Set the End Time from zero
(delete all end time displays)
or hold down the On/Off button
for 3 seconds. The End Time is
cancelled when the machine is
turned off and on again.
* Then, select the programme you
want to run again.
* Start the programme with the
Start/Pause button.
Starting the programme
* Start the programme with the
Start/Pause button.
* Programme follow-up light
showing the startup of the
programme will turn on.
C
Machine returns to OFF mode
when no programme is started or
no button is pressed in 10 minutes
during the programme selection.
Display and all indicators are
turned off.
When you press On/Off button,
information about the selected
programme is displayed.
Door lock
There is a locking system on the
loading door of the machine that
prevents opening of the door in cases
when the water level is unsuitable.
"Door Locked" LED in the panel turns
on when the loading door is locked.
Changes after programme
has started
Adding laundry after the programme has
started:
Stopping the machine (pause)
Press the Start/Pause button to switch
the machine to pause mode while a
programme is running. The Start/
Pause and the light for the step which
the machine is in start flashing in
the programme follow-up indicator
to show that the machine has been
switched to the pause mode. Also,
the loading door light flashes until it
is possible to open the door. Loading
Door light shall be turned off once the
loading door is ready to be opened, but
the programme step light and Start/
Pause light continue to flash.
Also, when the loading door is ready to
be opened, Loading Door light will also
turn off in addition to the programme
step light.
Changing the auxiliary function, speed
and temperature
Depending on the step the programme
has reached, you can cancel or activate
the auxiliary functions; see, "Auxiliary
function selection".
You may also change the speed and
temperature settings; see, "Spin
speed selection" and "Temperature
selection".
C
If no change is allowed, the
relevant light will flash for 3 times.
Adding or taking out laundry
* Press the Start / Pause button
to pause the machine. The
programme follow-up light of the
relevant step during which the
machine was switched into the
pause mode will flash.
* Wait until the Loading Door can
be opened.
* Open the Loading Door and add
or take out the laundry.
* Close the Loading Door.
* Make changes in auxiliary
functions, temperature and speed
settings if necessary.
* Press Start/Pause button to start
the machine.
28
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Grundig GWN 36431 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Grundig GWN 36431 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Grundig GWN 36431

Grundig GWN 36431 Gebruiksaanwijzing - Deutsch - 48 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info