7. Maintenance and
cleaning
Service life of product extends and
frequently experienced problems will
be reduced if it is cleaned at regular
intervals.
7.1 Cleaning Lint Filter / Loading
Door Inner Surface
Lint and fiber released from the
laundry to the air during the drying
cycle are collected in the Lint Filter.
C
Such fiber and lint are
generally formed during
wearing and washing.
A
Always clean the lint filter
and the inner surfaces of
the loading door after each
drying process.
C
You can clean the lint filter
housing with a vacuum
cleaner.
To clean the lint filter:
Open the loading door.
• Remove the lint filter by pulling
it up and open the lint filter.
• Clean lint, fiber, and cotton
raveling by hand or with a soft
piece of cloth.
• Close the lint filter and place it
back into its housing.
• A layer can build up on the filter
pores that can cause clogging
of the filter after using the dryer
for a while. Wash the lint filter
with warm water to remove the
layer that builds up on the lint
filter surface. Dry the lint filter
completely before reinstalling it.
• Clean the entire inner surface
of the loading door and loading
door gasket with a soft damp
cloth.
