ENGLISH
25
Setting and storing radio stations
Automatic station search
1 Press »ON/OFF« to switch on the device.
2 Select RADIO as the input source with »CD•RADIO•TAPE«.
3 Select the frequency band (FM or MW) by pressing the »BAND« but-
ton.
– Display: »FM« or »MW« and the frequency.
4 Activate the station search by holding down the »
Ń TUNING
Ľ
« button
until the frequency display changes to rapid run-through.
– The search stops when a programme is found.
Manual station search
1 To change the frequency in steps, press »Ľ TUNING
Ń
« several times.
– The frequency changes in 50 kHz steps (FM) and 9 kHz steps (MW).
Saving stations on station positions
You can store up to 10 radio station in the FM and in the MW bandwidths.
1 Select the frequency band (FM or MW) by pressing the »BAND« but-
ton.
2 Tune to the station you require with »
Ľ TUNING
Ń
«.
3 Press »MEMORY« briefly to activate the storage function.
– Display: the preset position most recently selected, e.g. »02«, »MEM-
ORY« flashes for approx. 10 seconds.
Note:
If no button is pressed for longer than 10 seconds during storing the
device cancels the storage function automatically.
4 Select the desired preset position using »PRESET UP«.
5 To store the station, press »MEMORY« again.
– Display: »MEMORY« and, for example, »03«.
6 To store more stations, repeat steps 2 to 5.
Note:
By storing again it is possible to overwrite stations already assigned to a
particular preset position.
SETTINGS
______________________________________________
TUNER
ST
FM
92.3
MHz
TUNER
FM
92.4
5
MHz
TUNER
MEMORY
ST
02
FM
106.6
MHz
TUNER
MEMORY
ST
03
FM
106.6
MHz
