ENGLISH
19
LNB setting
You must configure the LNB settings of the receiver according to
your LNB type.
If your satellite antenna is pointed at the THOR satellite and
equipped with a universal LNB, you do not need to change any-
thing.
Note:
The »LNB Setup« menu is in the main menu under »Installa-
tion«.
1 Press »CH
Ľ« or »CH Ń« to select the item and then press
»OK«.
2 Select the required settings by pressing »CH
Ľ« or »CH Ń«
and press »OK« to confirm.
3 Once you have entered all the settings, press »CH
Ľ« or
»CH Ń« to select »Store« and then press »OK« to confirm.
Note:
If you do not intend to use the pre-programmed stations, press
»RED« to enter the »Search setup« menu directly and start a
search.
4 Press »MENU« to go to the next setting.
Automatic satellite station search
During the automatic search, the system searches for stations on all
transponders.
1 Select »Number of Antenna« with »CH
Ľ« or »CH Ń« and
press »ľ VOL« or »ı VOL« to enter the number of antennas.
Notes:
If your receiver is connected to a DiSEqC system, set the number
of antennas and the current antenna accordingly.
Example: if your receiver is connected to three antennas, select
3 under »Number of antenna« and then assign the satellite
name to the current antenna.
2 Select »Current Antenna« with »CH
Ľ« or »CH Ń« and press
»ľ VOL« or »ı VOL« to select the first antenna.
Notes:
If you only have one antenna, you cannot make any changes
here.
BASIC SETTINGS
________________________________________
