789277
40
Verklein
Vergroot
Pagina terug
1/55
Pagina verder
40
Use
Starting and stopping the robot lawn-
mower
1. Set the main switch (5) to the ON position.
2. Press and hold the POWER button (a). The on/locked
indicator light (j) lights up red and the indicator
lights for battery (g) and error (h) ash alternately
The robot lawnmower is ready after about 4 seconds.
3. Enter the four-digit PIN code using the buttons 1-4
(b, c, d, e) and then press the OK button (f) to unlock
the control panel.
If you have entered the correct PIN code, the
indicator light for on/locked will be green.
If you have entered an incorrect PIN code, the
indicator light for on/locked will be red. Press the OK
button and enter the correct PIN code.
Note! The PIN code is set to 1-2-3-4 at the factory.
You can set your own PIN code – see “Changing the
PIN code.
If you want to lock the control panel, press the
LOCK/4 button (e).
4. Press the START/2 button (c) and then press the OK
button (f).
If the battery capacity is in excess of 30%, the battery
indicator light (g) will light up green and the robot
lawnmower will start to mow the lawn.
If the battery capacity is 30% or less, the battery
indicator light (g) lights up red and the robot
lawnmower automatically returns to the charging
station along the boundary cable.
5. If you press the HOME/3 button (d) and then the
OK button (f), the robot lawnmower returns to
the charging station, regardless of the batterys
remaining capacity. If it is within the cutting time, it
will recharge and run out again.
If you press the red STOP button (4), the robot
lawnmower stops immediately.
Running to the charging station
It is important that the robot lawnmower runs into the
charging station correctly when it needs charging, so
there is a specic running pattern.
When the robot lawnmower needs charging, it runs
until it registers the boundary cable. It will follow the
boundary cable all the way back to the charging station.
Setting the daily work time
1. Switch the robot lawnmower on as described above
so that the on/locked indicator light (j) lights up
green.
2. Press the SET WORK TIME/1 button (b) one or more
times to set the daily work time to 4, 6, 8, 10 or 12
hours. Press the OK button (f) to conrm the setting.
3. Press the START/2 button (c) to start the robot
lawnmower. The robot lawnmower starts cutting the
lawn and continues working for the set number of
hours. It starts cutting again each day at the same
time as the rst time. We recommend that the robot
lawnmower is set to start at 9 in the morning, when
there is not too much dew on the lawn.
Recommended daily work time:
300 m2 lawn: 4 hours
500 m2 lawn: 6 hours
You can subsequently change the robot lawnmowers
start time so that it starts at a dierent time than you
originally set.
Wait until the time that you want the robot lawnmower
to start every day.
Enter the PIN code. Press the SET WORK TIME/1 button
(b) and set the daily work time to 4, 6, 8, 10 or 12 hours.
Press the OK button (f) to conrm the setting.
Press the START/2 button (c) to start the robot
lawnmower.
The robot lawnmower then starts at this time every day
and works for the selected number of hours.
Boundary cut
The robot lawnmower is programmed at the factory to
automatically run along the boundary cable and cut the
grass once a week.
*Depending on software version.
40

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Grouw 17940 - S600 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Grouw 17940 - S600 in de taal/talen: Duits, Engels, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 18.94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info