788793
132
Verklein
Vergroot
Pagina terug
1/165
Pagina verder
53
GB
Installation
You can nd installation videos and tips at www.grouw.
dk.
The robot lawnmower’s operation
The robot lawnmower’s work area must be surrounded
by the boundary wire, which must form a continuous
loop around the area to be mowed.
The robot lawnmower runs in a random pattern within
the work area and changes direction whenever it
detects the boundary with its sensors, and each time it
encounters an immovable obstruction. This ensures that
the entire lawn is cut without leaving a pattern of wheel
tracks on it.
Once the robot lawnmower has registered the boundary
wire X times, it moves a few metres away from the most
recent registration point and runs around in a spiral
trajectory to improve its coverage of the lawn.
When the robot lawnmower needs charging, it
automatically follows the boundary wire back to the
charging station.
Planning
It is important that you carefully consider how the
boundary wire is laid out so that you encircle all the
obstacles such as beds, terraces, trampolines, shrubs
and trees, ponds and paths in your garden.
We recommend that you make a sketch of your garden
and mark the location of the charging station and the
boundary wire before you start laying it out.
If you follow the instructions above and take the time
required, it is not dicult to lay out the boundary wire.
Note! If your neighbour has a similar robot
lawnmower, there must be a clearance of at least
160 cm in all directions between your neighbour’s
boundary wire and your own! If your neighbour has a
robot lawnmower of a dierent make, you may need
an even greater distance, as the frequency in the
boundary wires are dierent.
Step 1: Installing the charging station
First nd out where in the garden the charging station
should be placed.
Theinstallationpointmustbeclosetoanoutdoor
electrical socket that the charging station can be
connected to.
Theinstallationpointmustbenexttothelawn.The
boundary wire that runs from the charging station
must be fed under the charging station so that its
end returns to the rear of the charging station. The
other end of the boundary wire must be fed to the
rear of the charging station.
Theinstallationpointmustbeatanddryandthere
must be no obstructions 2 metres in front of the
charging station and 1 metre behind it. The charging
station should not be placed in a corner, as there
is a risk that the robot lawnmower will get stuck
between the corner and the charging station.
Theinstallationpointmustbeintheshademost
of the day, as it is best not to charge the robot
lawnmowers battery in direct sunlight where the
temperature may get too high. If necessary, purchase
a garage for the robot lawnmower so that it has
some cover when it is not cutting the grass.
Theinstallationpointmustbefreeofantnestsand
the like to prevent insects getting into the charging
station.
132

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Grouw 17937 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Grouw 17937 in de taal/talen: Duits, Engels, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 17.87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info