788793
61
Verklein
Vergroot
Pagina terug
1/165
Pagina verder
61
GB
Note!
If the error indicator light ashes red on the robot
lawnmower, there is an error in the boundary wire
signal:
Therobotisoutsidetheboundarywire.
Theboundarywireistoolong(over250m).
Theboundarywireisassembledincorrectly,there
is moisture in a joint, or an incorrect connector has
been used.
TheboundarywiremustNOTbestrippedwhen
using the connector provided.
Youcanremovetheendsoftheboundarywirefrom
the charging station and measure the resistance
of the boundary wire using a multimeter. A new
boundary wire has a resistance of about 2 Ohm per
100 metres.
If the boundary wires resistance measures more
than 8-10 Ohm, the robot lawnmower will display a
boundary wire signal error.
Correct the error or replace the boundary wire.
5) Abnormal battery temperature
The robot lawnmower will report an error if the battery
temperature during operation is outside the range of
0-75 °C or during charging is outside the range of 0-45
°C.
The robot lawnmower returns to the charging station
and lets the battery return to a safe temperature.
The risk of this is greatest in summer, when the outside
temperature in direct sunlight approaches 35 °C. It may
be a good idea to change the start time of the robot
lawnmower so that it starts earlier in the day when it is
not so hot.
6) Battery error
The robot lawnmower reports an error if the battery
is defective. Replace the battery with a new original
battery with the same specications as the defective
battery.
If the battery indicator light lights up red instead,
the battery simply needs charging. Carry the robot
lawnmower to the charging station and manually
charge it.
7) Charging error
The robot lawnmower has returned to the charging
station but it cannot be charged.
Check that the charging poles are clean and are
correctly inserted into the charging socket on the robot
lawnmower.
If the battery is at, you must perform manual charging.
Manual charging
Pull the robot lawnmower out of the charging station.
Move the main switch to the OFF position and wait 5
seconds.
Set the main switch to the ON position and push the
robot lawnmower into the charging station again. Do
NOT switch the robot lawnmower on using the Power
button (a)!
The indicator light on the charging station does not
necessarily change to red immediately if the battery
voltage is very low. It can take up to 1 hour before the
indicator light on the charging station turns red.
When the indicator light on the charging station
lights up green, charging is complete and the robot
lawnmower is fully charged.
8) PCB overheating
The robot lawnmower reports an error if the PCB
overheats. The robot lawnmower returns to the
charging station and allows the PCB to return to a safe
temperature.
The risk of this is greatest in summer, when the outside
temperature in direct sunlight approaches 35 °C. It may
be a good idea to change the start time of the robot
lawnmower so that it starts earlier in the day when it is
not so hot.
61

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Grouw 17937 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Grouw 17937 in de taal/talen: Duits, Engels, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 17.87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info