505521
15
Verklein
Vergroot
Pagina terug
1/27
Pagina verder
10
GROUND ZERO
Programming preset stations
You can store up to a total of 30 radio stations in the memory (18 FM, 12 AM), manually or
automatically.
To store a station:
- Select a band (if needed)
- Search a station by manual/automatic tuning
- Hold a Preset button (1-6) on remote control, where you want to store the station for at least
2 seconds. Or on front panel you can press OK button first and rotate VOL knob to choose (1-
6), and finally press OK button to confirm.
To recall a station:
- Select a band (if needed)
- Press a Preset button (1-6) on remote control to recall the stored station., or on front panel,
you can press T-UP/DN buttons to recall the stored station
Auto memory store
Select a band, press MEM button on front panel or AS/PS button on Remote control and hold for 2
seconds to enter auto store mode. The radio will automatically store 6 stations to the 6 preset memories
of the current band. To stop auto store, press this button again.
Note: During auto station preset, the unit will search and store stations with the strong signal first, and
then weaker signal stations until the memories are full.
Preset scan
Select a band, press MEM button on front panel or AS/PS button on Remote control to scan all preset
stations in the memories of the current band, each preset scan for 5 seconds. To stop preset scan, press
the button again.
AF (Alternative Frequencies) function
Press AF/REG button on remote control to turn on or turn off the AF function. You can also press and
hold SEL button and press it repeatedly to see AF, then rotate VOL knob on front panel or press V-/+
button on remote control to set this function on/off. If the AF function is on the display will show “AF”.
When AF switching mode is selected, but RDS information is not received yet the “AF” will be flashing.
The RDS program will be automatically searched and received. After turning on, if the RDS signal is weak
or even no signal, the unit will search another frequency with this RDS program.
REG (Regional) function
Press and hold AF/REG button on remote control for 2 seconds to enable or disable REG mode. You can
also press and hold SEL button and press it repeatedly to see REG, then rotate VOL knob on front panel
or press V-/+ button on remote control to set this function on/off. (Default is off for REG).
When REG is enabled (on), the receiver accepts regional variants of the tuned station with REG icon
turned on.
When REG is disabled (off), the receiver ignores regional variants.
TA (Travel Announcement) / TP (Travel Program Identification)
1) Enable or disable TA mode by pressing and hold BAND button on front panel or pressing TA/TP
button on remote control: (Default is OFF)
2) When TA function is activated, it will search the station with TA information automatically. If there is
no TA information, it will search the station with TP information automatically, if there is no TP
information either, it will return to the previous station after searching.
3) When receiving the station with TP information but without TA information, TP icon is on and TA
icon keeps blinking; when receiving the station with TP and TA information, both TP and TA icons
are on.
11
GROUND ZERO
4) When playing in other mode and TA information is received, it will change to the radio mode
automatically. After playing over, it will return to the previous mode. Press TA button once to ignore
the received TA information, press TA button twice to turn off the function.
PTY (Program Type)
Press and hold OK button on front panel or press PTY button on remote control to open PTY program
type list, and turn the VOL knob on front panel or press VOL+/- buttons on remote control to select a
PTY type. After selecting the program type you want, press OK button on front panel or press PTY
button on remote control to search. Press them again to stop the PTY search. If PTY code is different or
not available, LCD blinks with “PTY NONE”.
CD / USB/ SD Card Operations
Loading/Ejecting a disc
Turn the power on. And insert the disc to disc slot with the printed side facing up. Press EJECT button to
eject the disc. Inserting the SD card/USB device Insert the SD card or USB device into SD slot or USB
socket. Then the playing mode will be changed into SD or USB mode automatically.
Note!
When SD card and USB device are both inserted, the playing mode will be changed into the mode of the
device inserted later.
Playing/pausing
The unit will automatically play from the first sound track recorded on a disc/SD /USB device. To ensure
good system performance, wait until the unit finishes reading the disc /device information before
proceeding. Press 1/PAUSE button on remote control to pause playback, press it again to resume
playback.
Playing the previous/next track
During playback press PREVIOUS button to play the previous track. Press NEXT button to play the next
track.
Scanning forward and backward
Press and hold Fast forward/backward buttons to select fast forward/backward playing. Note: When fast
backward/forward playback reaches the previous or next track, the unit will resume normal playback.
- / + 10 files
Press 5/ 10-, 6/ 10 + buttons on remote control to jump to previous/next 10 files.
Repeat playback
Press 2/REPEAT on remote control or press BAND button on the panel repeatedly to choose repeat Play,
then press OK to confirm to play track repeatedly, press again to cancel.
Note!
After finishing playing all tracks or all folders of CD/MP3/SD, the unit restarts playing all tracks or all
folders automatically.
Intro
Press 3/INT button on remote control or press BAND on the panel to choose INT Play, then press OK to
confirm to activate INTRO function which will play the beginning of every track for 10 seconds.
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ground zero GZCR 235USB bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ground zero GZCR 235USB in de taal/talen: Duits als bijlage per email.

De handleiding is 1,78 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info