505393
148
Verklein
Vergroot
Pagina terug
1/200
Pagina verder
148
UK
The saw chain must not contact either
the ground or another object during
sawing through or after sawing com-
pletion.
Make sure that the saw chain does not
become jammed in the wood. Do not
let the tree trunk break or split off.
Consider also the precautions against
spring-back (see notes on safety).

do not attempt to pull out the



-

Bucking
This refers to sawing up a felled tree trunk
into smaller sections.
Ensure that the saw chain does not
come in contact with the ground during
sawing.
Make sure you have a secure stance
and, in the case of sloping ground,
stand above the log.
1. Log is lying on the ground:
Saw through the log completely
from above and ensure at the
end of the cut not to contact the
ground.
If you can turn the tree trunk, saw
two-thirds of the way through it.
Then turn the trunk around and
saw the rest of the way through
from above.
2. Log is supported at one end:
Start sawing from the bottom and
work your way up (with the upper
edge of the bar) a third of the way
If no trace of oil appears, it may
be necessary to clean the oil out-
let channel or to have the electric
chainsaw repaired by our customer
service.
Sawing techniques
General
Observe the noise protection and lo-
cal regulations when cutting wood.
Local requirements may require a
suitability test. Ask the forestry com-
mission.
Dirt, stones, loose bark, nails, staples
and wire must be removed from the tree.
For sawing work on a slope, always
stand above the tree trunk.
To keep control at the moment of
“sawing through”, reduce the contact
pressure at the end of the cut without
loosening the rm grip on the chain-
saw handles. Ensure that the saw
chain does not come into contact with
the ground.
After completing the cut, wait for the
chainsaw to come to a standstill be-
fore removing the chainsaw.
Always switch off the chainsaw motor
before moving from one tree to an-
other.
Lay the connecting lead such that
it will not be caught on branches or
similar during sawing.
For each cut, apply the claw stop se-
curely and only then start sawing.
You have better control when you saw
with the bottom side of the chain bar
(with pulling saw chain) and not to
with the top side of the chain bar (with
pushing saw chain).
148

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Grizzly EKS 1835 QT bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Grizzly EKS 1835 QT in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Pools als bijlage per email.

De handleiding is 6,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info