505473
86
Verklein
Vergroot
Pagina terug
1/128
Pagina verder
UK
86
in the same way with the carri-
age bolts, hand wheel nuts and
sheet metal rings.
5. Fix the mains cable with the ca-
ble clamps (15).
Reassembling the Wheels
In order to be able to work safely, the wheels
must be reassembled. The position required
for packaging is not suitable for working.
1. Pull the safety clip (18) and re-
move the retaining pin (19).
2 Take off the wheels (10). Rotate
them 180° and now attach the
wheels (10) onto the frame.
3. Fix the wheels (10) by inserting
the retaining pin (19) and app-
lying the safety clip (18).
The wheels are now adequately spaced to
be able to work safely.
Operation
Observe noise-abatement laws and
local by-laws.
Switching on and off
Note: Before switching the tool
on, make sure that the tool is not
touching any other objects and
hold it rmly in both hands.
1.
Plug the tool into the extension cable.
2.
For cable strain relief, form a loop
in the end of the extension cable
and hang it into the cable relief (6).
3. Connect the equipment to the
mains power supply.
4. To switch on, press the release
button (3) on the handle then the
starting lever (4). Release the
release button (3).
The cutting blades start to ro-
tate and dig into the ground.
5. To switch off, release the starting
lever (4).
Warning! The tines will continue
to turn for a few seconds after
the tool has been switched off.
Do not touch the rotating tines –
injury hazard!
Depth Adjustment
Adjust the desired working depth by chan-
ging the position of the wheels. The equip-
ment has 7 positions for depth adjustment.
1. Pull the safety clip (18) and re-
move the retaining pin (19).
2. Set the desired depth adjust-
ment by repositioning the con-
necting piece (20).
3. Fix the wheels (10) by inserting
the retaining pin (19) and app-
lying the safety clip (18).
Cutting Blade
The garden hoe can be operated with
a choice of four or six cutting blades.
Operating with four cutting blades means
greater force. Operating with six cutting
blades means a greater working width.
The two outer cutting blades can be de-
tached: see next page on Replacing the
Cutting Blades.
• Removeonlytheouterscrews
at this point.
• Thetwooutercuttingblades
can be removed.
Operating instructions
Always keep a rm grip on the
tool with booth hands and watch
86

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Grizzly EGT 1345 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Grizzly EGT 1345 in de taal/talen: Nederlands, Duits, Frans, Italiaans, Portugees, Pools als bijlage per email.

De handleiding is 6,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info