708280
11
Verklein
Vergroot
Pagina terug
1/210
Pagina verder
10
English (original instructions)
Keep all cooling air inlets clear of debris.
Never blow debris in the direction of bystanders
Before starting the machine, make certain that the
feeding chamber is empty.
Keep your face and body away from the feed intake
opening.
Do not allow hands or any other part of the body or
clothing inside the feeding chamber, discharge chute,
or near any moving part.
When feeding material into the machine be extremely
careful that pieces of metal, rocks, bottles, cans or
other foreign objects are not included.
If the cutting mechanism strikes any foreign objects
or if the machine should start making any unusual
noise or vibration, immediately shut off the power
source and allow the machine to stop. Disconnect the
machine from the supply and take the following steps
before restarting and operating the machine: i)
inspect for damage;
) replace or repair any damaged parts;
) check for and tighten any loose parts.
Do not allow processed material to build up in the
discharge zone; this may prevent proper discharge
and can result in kickback of material through the
intake opening.
If the machine becomes clogged, shut-off the power
source and disconnect the machine from supply
before cleaning debris.
Never operate the machine with defective guards or
shields, or without safety devices, for example debris
collector in place.
NOTE If a debris collector is not used the text of the
example may be deleted.
Keep the power source clean of debris and other
accumulations to prevent damage to the power
source or possible fire.
Do not transport this machine while the power source
is running.
Do not tilt the machine while the power source is
running.
Do not operate the machine when barefoot or
wearing open sandals. Avoid wearing clothing that is
loose fitting or that has hanging cords or ties.
Always stand clear of the discharge zone when
operating this machine.
Stop the machine, and remove battery pack. Make
sure that all moving parts have come to a complete
stop
- whenever you leave the machine,
- before clearing blockages or unclogging chute,
- before checking, cleaning or working on the machine.
MAINTENANCE AND STORAGE
Keep all nuts, bolts and screws tight to be sure the
appliance is in safe working condition.
Replace worn or damaged parts.
Your machine has been engineered and manufactured to
Greenworks tools’s high standard for dependability, ease
of operation, and operator safety. When properly cared
for, it will give you years of trouble-free performance.
For use with tool only.
GENERAL SAFETY WARNINGS
WARNING
When using battery operated tools basic safety
precautions should always be followed to reduce the
risk of fire, leaking batteries and personal injury,
including the following.
Do not touch the fan when operating this unit.
Keep the handles dry and clean.
TRAINING
Read the instructions carefully be familiar with the
controls and the proper use of the appliance.
Never allow children to use the appliance.
Never allow people unfamiliar with these instructions
for use the appliance local regulations may restrict
the age of the operator.
Never operate the appliance while people especially
children, or pets are nearby.
The operator or user is responsible for accidents or
hazards occurring to other people or their properly.
PREPARATION
While operating the appliance, always wear
substantial footwear and long trousers.
Do not wear loose clothing or jewellery that can be
drawn into the air inlet. Keep long hair away from the
air inlets.
Obtain ear protection and safety glasses. Wear them
at all times while operating the machine.
Wearing a face mask is recommended to prevent
dust irritation.
Operate the machine in a recommended position and
only on a firm, level surface.
Do not operate the machine on a paved or gravel
surface where ejected material could cause injury.
Before using, always visually inspect to see, that the
shredding means, shredding means bolts and other
fasteners are secure, the housing is undamaged and
that guards and screens are in place. Replace worn
or damaged components in sets to preserve balance.
Replace damaged or unreadable labels.
OPERATION
Operate the appliance only in daylight or in good
artificial light.
Do not overreach and keep your balance at all times.
Always be sure of your footing on steps.
Walk, never run.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Greenworks GD80BL - 2400407 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Greenworks GD80BL - 2400407 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 23,8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info