627692
8
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
8
Theory of Operation
The CS-8000 transmitter is intended for connection to an electrical line (up to 750 volts) or
other metallic object. The transmitter signal consists of a controlled frequency with a specific
modulation and timing that is different for live and open circuits. This composite signal gives it a
specialized signature.
The transmitter signal generates a corresponding magnetic or electrostatic field signature around
the conductor being traced. This field signature is present the entire length of the conductor,
including breakers, fuses, switchgear, and transformers.
The CS-8000 receiver is tuned and programmed to pick up only the field signatures produced
by the transmitter. To be received, the signal must have this exact frequency, modulation, and
timing. This feature greatly reduces the possibility of interference from electrical noise, which is
often caused by lamps, appliances, fluorescent fixtures, or machinery that is on the same line.
Both the transmitter and the receiver are microprocessor-controlled for maximum ease of use
and accuracy.
Basic Operation
These instructions provide the user with a basic understanding of how the unit functions. These
tests are best performed at a desk or bench.
Transmitter
1. Push and release the Power button. The Power LED illuminates, indicating unit power and
signal being sent.
2. Plug the unit into any energized outlet. The Live Line LED also illuminates, indicating that the
transmitter is connected to an energized circuit.
3. Unplug the unit. Push and release the Power button to turn the unit off.
Receiver
1. Push and release the Power/Signal Reset button to turn the receiver on.
2. The Transmitter Signal Indicator (segments of the red oval) will rotate, indicating the receiver
is searching for a signal. The display will indicate the unit is set to “BREAKER MODE.” A
small blue bar will appear on the left side of the screen, indicating there is no signal strength
available. A red bar at the end indicates the maximum signal the unit has received since
Signal Reset. The unit will also read “AUTO GAIN”, which is the default mode when the unit
power is turned on.
3. Push and release the Mode Selector button. Indication will change from “BREAKER MODE”
to “SEARCH MODE.” This button toggles between the two available settings. Whenever this
button is pushed, the signal strength automatically resets.
4. Push and release the up or down arrow button. Indication will change from “AUTO GAIN” to
“MANUAL GAIN.”
5. Push and hold the Power/Signal Reset button for approximately one second to set the unit
back to “AUTO GAIN.”
6. Push and hold the Power/Signal Reset button to turn the receiver off.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Greenlee CS-8000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Greenlee CS-8000 in de taal/talen: Engels, Frans, Spaans als bijlage per email.

De handleiding is 3,47 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info