747991
10
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
EN
No. 33028
16 channel HoTT 2,4 GHz transmitter
mc-28
Manual
Copyright © Graupner/SJ GmbH
Part 1
MC-28
MC-28
MC-28 MC-28
esc set
2 / 40 33028_mc28_T1V3_sh_en
3 / 40
33028_mc28_T1V3_sh_en
Index
Introduction ......................................................................................5
Service Centre ...................................................................................5
Intended use .....................................................................................6
Target group ....................................................................................6
Package content ................................................................................7
Technical Data ...................................................................................7
Symbols explication ..........................................................................8
Safety notes ......................................................................................8
For your safety by handling the transmitter ..................................9
For your safety by handling the battery .........................................9
Description of the transmitter .......................................................11
Control elements on the transmitter ...........................................11
Inside view ....................................................................................13
Interfaces ......................................................................................14
DSC socket .....................................................................................15
Memory cards ...............................................................................16
Display and touchpad ...................................................................17
Symbols in the display ..................................................................18
Key pad ..........................................................................................19
Commissioning ................................................................................20
Hand pads .....................................................................................20
Brackets for transmitter belt ........................................................20
Anchorage for the transmitter belt ..............................................20
Opening/closing the transmitter housing ....................................21
Sticks conversion ...........................................................................22
Control sticks length adjustment ..................................................22
General commissioning ..................................................................23
Binding a receiver .........................................................................24
Adjust control mode .....................................................................25
Charging the transmitter battery .................................................26
Low voltage warning .....................................................................27
Battery use timer in the display ....................................................27
Switch off the transmitter.............................................................27
Lithium battery .............................................................................27
Use and menu functions ................................................................28
Short-Cuts .....................................................................................28
Hidden mode ................................................................................30
Firmware update/Changing the display language .......................31
Telemetry data display ..................................................................32
4 / 40 33028_mc28_T1V3_sh_en
Firmware update ............................................................................36
Update through memory card ......................................................36
Update through USB port .............................................................37
Problems during firmware update ...............................................37
SIMPLIFIED DECLARATION OF CONFORMITY ................................38
Manufactured by ..........................................................................38
Notes on environmental protection ..............................................39
Care and maintenance ...................................................................39
Warranty .........................................................................................39
5 / 40
33028_mc28_T1V3_sh_en
Introduction
Thank you very much for purchasing the Graupner mc-28 HoTT
transmitter.
This manual is composed by two parts. Part 1 is contained in the
product’s package content. Part 2, the programming manual, can be
found in its last version on www.graupner.de by the related item
page.
Read both manuals carefully to achieve optimal use of your transmit-
ter and first of all to safely control your models. If you experience any
trouble during operation, take the instructions to help or ask your
dealer or Graupner Service Centre.
Due to technical changes, the information may be changed in this
manual without prior notice. Be always updated by checking period-
ically on our website, www.graupner.de to be always updated with
the products and firmware.
This product complies with national and European legal require-
ments.
To maintain this condition and to ensure safe operation, you must
read and follow this user manual and all the safety notes before
using the product!
Note
This manual is part of that product. It contains important informa-
tion concerning operation and handling. Keep these instructions for
future reference and give it to third person in case you gave the
product.
Service Centre
Graupner Central Service
Graupner/SJ GmbH
Henriettenstraße 96
D-73230 Kirchheim / Teck
Servicehotline
(+49) (0)7021/722-130
Monday - Thursday
9:15 am - 4:00 pm
Friday
9:15 am - 1:00 pm
Graupner USA
3941 Park Dr Suite 20-571
El Dorado Hills, CA. 95762
US
Website: www.graupnerusa.com
Phone: +1 855-572-4746
Email: service@openhobby.com
Graupner in Internet For the service centers outside Germany please refer to our web site
www.graupner.de
6 / 40 33028_mc28_T1V3_sh_en
Intended use
This remote-control system may only be used for the purpose spec-
ified by the manufacturer for operation of UAVs and other unmanned
remote control models. Any other type of use is impermissible and
may damage the system and cause significant property damage and/
or personal injury. No warranty or liability is therefore offered for any
improper use not covered by these provisions.
In addition, it is explicitly pointed out that you must inform yourself
about the laws and regulations applicable at your respective starting
point before starting the remote control operation. Such conditions
may differ from state to state, but this must be followed in every
case.
Notes
In general, it is not permitted to fly over airports, factory sites,
nature reserves, built-up areas, etc.
Where designated no-fly zones are located, and which in no way
affect them, it can be determined, for example, using the “Air-
Map” app.
Read through this entire manual before you attempt to install or use
the transmitter.
Target group
The product is not a toy. It is not suitable for children under 14 years.
The operation of the mc-28 HoTT transmitter must be performed
by experienced modelers. If you do not have sufficient knowledge
about dealing with radio-controlled models, please contact an expe-
rienced modeler or a model club.
7 / 40
33028_mc28_T1V3_sh_en
Package content
Transmitter mc-28 HoTT
Transmitter battery
Receiver (optional)
USB Adapter/Interface
USB cable
Micro SD card with adapter
Hand pads
Transmitter belt
Brackets for transmitter belt
Short and long stick-tops
Aluminum case
Transmitter manual (Part 1)
Receiver manual (optional)
The programming manual (manual part 2) can be found in its last
version on www.graupner.de by the related item page.
Technical Data
Transmitter mc-28 HoTT
Frequency band 2,4 … 2,4835 GHz
Modulation FHSS
Transmitting power 100 mW EIRP
Control functions 16 functions of which 4 can be trimmed
Temperature range -10 … +55 °C
Antenna Patch integrated in the case
Operating voltage 3,4 … 4,35 V (1S LiPo)
Power consumption approx. 400 mA
Range approx. up to 4.000 m
Dimensions approx. 235 x 228 x 66 mm
Weight approx. 1250 g with transmitter battery
Note
The technical data of the optional receiver are available in the man-
ual included in the receiver package content.
8 / 40 33028_mc28_T1V3_sh_en
Symbols explication
!
Always observe the information indicated by this warning sign. Par-
ticularly those which are additionally marked with the CAUTION or
WARNING. The signal word WARNING indicates the potential for
serious injury, the signal word CAUTION indicates possibility of
lighter injuries.
The signal word Note indicates potential malfunctions.
Attention indicates potential damages to objects.
Safety notes
!
These safety instructions are intended not only to protect the prod-
uct, but also for your own and other people’s safety. Therefore please
read this section very carefully before using the pro duct!
Do not carelessly leave the packaging material lying around,
since it might become a dangerous toy for children.
Persons, including children, with reduced physical, sensory or
mental capabilities, or lack of experience or knowledge, or not
capable to use safely the transmitter must not use the transmit-
ter without supervision or instruction by a responsible person.
Operation and use of radio-controlled models needs to be
learned! If you have never operated a model of this type before,
start carefully and make yourself familiar with the model's reac-
tions to the remote control commands. Proceed always respon-
sibly.
Protect all equipment from dust, dirt, moisture. All equipment
must be protected from vibration as well as excessive heat or
cold. The models may only be operated remotely in normal out-
side temperatures such as from -10°C to +55°C.
Always perform a range and function test on the ground before
you start using your model. Only so you can grant a safe use! How
to perform a range test is explained in the Part 2 of the manual.
Only operate all your HoTT components using the current soft-
ware version.
If you have questions which cannot be answered by the operat-
ing manual, please contact us or another expert in the field.
9 / 40
33028_mc28_T1V3_sh_en
For your safety by handling the transmitter
!
WARNING
Also while programming the transmitter, make sure that a con-
nected motor cannot accidentally start. Disconnect the fuel sup-
ply or drive battery beforehand.
!
CAUTION
Risk of fire! Avoid every kind of short-circuit in all sockets of the
transmitter! Use only the suitable connectors. In no case the elec-
tronic component of the transmitter may be changed or modified.
Due to licensing reasons, any reconstruction and/or modification
of the product is prohibited.
Note
During transport protect the model and the transmitter from dam-
ages.
For your safety by handling the battery
!
CAUTION
Protect all equipment from dust, dirt, moisture. Only use in dry
locations.
Do not use any damaged battery. Risk of injury!
Any alterations to the battery can cause serious injury. Risk of
fire!
Batteries may not be heated, burned, short-circuited or charged
with excessive current or with reversed polarity.
While they are being charged, the batteries must be placed on a
non-flammable, heat-resistant and non-conductive surface.
Combustible or highly flammable objects are to be kept away
from the charging area. Batteries must be monitored while they
are being charged.
The maximum quick charging current specified for the respective
cell type may not be exceeded.
If the battery heats up above 60°C while it is being charged, stop
charging and let the battery cool down to approximately 30 -
40°C.
The batteries must not be modified. Do not directly solder or
weld the cells.
If handled improperly, there is a danger of fire, explosion, irrita-
tion and burns. To extinguish a fire use water, CO2, sand.
Leaked electrolyte is caustic and should not be touched or come
into contact with your eyes. In case of emergency, rinse with a
large quantity of water and consult a Med. Doctor.
10 / 40 33028_mc28_T1V3_sh_en
Always charge the battery fully.
The maximum charging current permitted may not be exceeded.
Never leave the charger unattended when it is connected to the
power supply.
Batteries may only be charged in rooms fitted with smoke detec-
tor.
Safety notes for stocking LiPo / LiIo batteries
Batteries may only be stored in non completely discharged con-
dition.
Batteries may only be stored in dry rooms with an ambient tem-
perature of +5°C to +25°C.
Stock the LiIo/LiPo batteries with a cell voltage of about 3,8V. If
the cell voltage falls below 3 V, then the battery must be neces-
sarily charged. Deep discharge and storage in discharge status
(cell voltage < 3V) make the battery useless.
Charge and transport your batteries always in a safety bag.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Graupner MC-28 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Graupner MC-28 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,73 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Graupner MC-28

Graupner MC-28 Gebruiksaanwijzing - Deutsch - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info